Master
SubscriberWhy don't my mirrors dip down in reverse?
The manual suggests they should.
Llams shows settings correct.
Am I dreaming they should?
Cheers
Vin
Cheers Vin
2025 D350 Defender 110
Wizard
You have to set them up how you want them. From memory (it's been a whileOriginally Posted by rhinosm
) you have the engine running, put the car in reverse and then manually, using the buttons adjust them to how you want them. Next time you put the car into reverse they should dip to the position you set them at.
Martin
TopicToaster
On a D3 it's in the SETTINGS on the message centre of the dash.
Push the i button on the indicator stalk to activate.
I actually don't have mine dip as I prefer to look at what I am about to run over rather than watch it come out from under the wheels
Cheers, Dale
PIC - It comes with the Territory
'The D3' - 2006 TDV6 HSE
2008 Kimberley Kamper Sports RV
Previously Enjoyed:
2002 Adventure Offroad Campers 'Cape York'
2000 D2 Td5 - plus!
1997 Defender 110 Wagon - fully carpeted
ForumSage
Same here - I'm glad my mirrors don't dip in reverse.On a D3 it's in the SETTINGS on the message centre of the dash.
Push the i button on the indicator stalk to activate.
I actually don't have mine dip as I prefer to look at what I am about to run over rather than watch it come out from under the wheels
A couple of loan cars I've had from the dealers recently (Evoque and Disco Sport) both had dipping mirrors - I didn't like it at all. I suppose it might be different though if you also had a reversing camera and were in the habit of looking at the screen to see what is behind you - before you see it come out from under your wheels in the mirrors.
Cheers .........
BMKAL
Super Moderator
SubscriberI am confused about how Llams fits into this function?
Scott
D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
Link to my D4 Build Thread
D3 2005 V8 Petrol
Ex '77 RRC 2 door. Long gone but not forgotten.
Master
SubscriberGood pick up Scott.
Its the IID Tool. Too much technology.
I was able to activate mirrors dipping.
Cheers Vin
2025 D350 Defender 110
Isn't it a trim level specific option?
You may not have the control units to drive the function.
Master
Agree with others that it's a function that doesn't appeal after experiencing it in a loaner Evoque.
Sometimes gadgetry is there for no reason other than to confuse and mystify some, and bedazzle others.
Ron
2013 D4 SDV6 SE
YarnMaster
Hi,
I dip the mirrors with the toggle switch to back up the drive at home. Pity it is only a Corolla.
The Defender mirrors give a good view and won't adjust any way.
Cheers
Master
SubscriberFWIW I really like the function. I have set it up so I can see the rear wheels and bumper. I mostly use the rear view camera. If you increase reversing speed the mirrors will raise back to normal position and dip again when speed is slowed again.
Cheers, Mungus.
_________________
MY14D4HSE, Nara Bronze, E-Diff, Vision Assist, Surround Cameras, LLAMS, ProSpeed Sliders/Compressor plate, Mitch Hitch,
ARB Summit Bar, Runva 11XP, Traxide D3-DU, GOE Comp. Rims, D697 265/60R18, Rijidij RWC, Fyrlyts.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks