Adaptive Cruise Control and ARB Bull Bar

Quote:

---

Originally Posted by rhinosm

... decided to follow Mungus install as it was much neater, as well as getting the control box out of radar's way....

---

Thanks Rhinosm.

I recall seeing some great photos by Mungus of his Runva install including cutting the ARB cover plate to mount the control box, but I can't find these anywhere, not even in his gallery. Got any ideas where I might look please?

Andrew

Hi
try this link, Mungus has some really helpful photos.
D4 Landrover Bull Bar - latest news

I've attached a few more also.

Finally got the ARB Summit bar fitted. Good news is that like rhinosm's experience the Adaptive Cruise Ccontrol still works [bigsmile1], although it seemed to get a little confused in the rain last w/e. Bad news is that neither a SmittyBilt nor Warn winch could be installed as they both physically hit the ACC [bigsad]. So I'll have to try a Runva if I can first determine the clearance between the back of the winch and the ACC unit.

Also fitted ARB Intensity lights which are awesome, just like on the old D3. Relay is fitted on the LH wing, just behind the LH headlight.

Hi Andrew
I to have had a fault on ACC in rain, "Radar is Blocked" type of message.

I did have to cut the bottom off the radar mounting bracket as it clashed with winch when reinstalling bull bar with winch.
The lower piece with a black rubber strip on it, I cut off half way up the vertical section.

To save me starting a new post, is anyone interested in fitting ACC to their D3 ? Found some new ECU's in the US for USD28 and seeing if anyone else wants to buy one to lower the postage a bit.