Page 9 of 32 FirstFirst ... 789101119 ... LastLast
Results 81 to 90 of 315

Thread: 18 inch 3.0 wheels.

  1. #81
    Join Date
    Aug 2007
    Location
    Bunbury, WA
    Posts
    2,507
    Total Downloaded
    0
    Quote Originally Posted by Graeme View Post
    It appeared to me that at least 3-4mm would need to be shaved from the fins at the rear just for the fins to clear but couldn't determine if they would scrape at other spots. However the std 18" rim fouled the original rear caliper far worse, not allowing the rim to sit anywhere near flat on the hub whereas the fronts only just don't sit flat.

    Edit: If I had known at the time about the rear calipers I would have started shaving the fronts to see if a little material removed was enough.
    Thanks Graeme.
    When you say "...However the std 18" rim fouled the original rear caliper far worse...", I take you mean with the "early D4" rear calipers from your post above? It was my assumption that LR 18" alloys fit over the rear calipers of later D4s?

  2. #82
    Join Date
    Dec 2011
    Location
    Forrestfield WA
    Posts
    1,306
    Total Downloaded
    0
    So Graeme, are there any negatives to replacing the rear callipers with the later ones, apart from the cost? They cause more scrapes on the inside of the GOE wheels than the fronts do and I could replace Gordon's heavy steel second spare with a much lighter LR alloy spare at the same time.


    Both of these rims would probably be illegal due to the differing offset from the Compomotives but they never actually get used. I have a Compomotive for one of the spares.
    Bob

    2010 D4 3.0TDV6 SE, ediff, LLAMS, 5 x GOE wheels, LT285/60R18 BFG K02's, GOE Compressor Guard, LR Tank, Mitch Hitch, ECB Bull Bar, Kaymar Rear Bar, Traxide, Safari Snorkel.
    2019 Discovery 5 SD6 SE, 20 inch wheels, 275/55R20 Nitto Grappler G2 tyres

  3. #83
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    Quote Originally Posted by carlschmid2002 View Post
    Is that colour Ipanema Sand? Mine is. I was going to order Black GOE wheels but the Graphite look really good. Great looking car.


    Thanks, yep Ipanema Sand.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  4. #84
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Quote Originally Posted by BobD View Post
    So Graeme, are there any negatives to replacing the rear callipers with the later ones, apart from the cost? They cause more scrapes on the inside of the GOE wheels than the fronts do and I could replace Gordon's heavy steel second spare with a much lighter LR alloy spare at the same time.


    Both of these rims would probably be illegal due to the differing offset from the Compomotives but they never actually get used. I have a Compomotive for one of the spares.
    I have a set of 6 off an early D4.Now I know why some have minor internal scrapes
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  5. #85
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Adding my 2 cents .....

    I have a set of the anthracite Compomotive rims and actually really like the aesthetic.


    Aesthetics was not my primary reason to buy, more the points summarised by Gordon a few posts ago.
    However the way they look is something I'm really happy with, a somewhat rare example of neither form or function being sacrificed.
    In my view they look purposeful & serious and much better than the factory wheels, which for me are the basic TDV6 ones.

    I'm quite surprised some people don't like the appearance but of course there's always a wide range of opinions & that's fair enough.
    Those CSA wheels starting this thread and others like them look ordinary, cheap and straight off some dual cab hilux but that's just my opinion.

    Despite all the interest here, I reckon the market for full spec 18" wheels to suit late model D4s is actually quite small in the grand scheme of things.
    Even smaller market for ones that have all the features & aust compliance of the Compomotives, thus market forces dictate and no one else to date has gone to the same effort.
    So the chances of more than one version or a range seem pretty slim to me.

    Regarding looking for alternatives, I've noticed the history leading to even having the Compomotive as an option is not well known and Gordon's frustrations leading to the [/rant] [level 4] are understandable. Some people are dismissive and everything is easy until you have to actually make it happen. Perhaps the [/rant] could be edited & added to the FAQs.

    But most people are genuine in their investigation into options. I see they are happy to take on information to make a properly informed decision about value versus cost, recognising that money is not growing on trees the last I checked.
    It's true that many people are now looking at D3s and D4s in much lower cost brackets with less budget to play with.
    But don't forget the cheaper vehicles are of course older and therefore can already fit a multitude of affordable 18" factory wheels and in some cases 17" wheels.

    Plus it's actually more complicated than when I was deciding two years ago.
    The 19" tyre situation has improved quite a lot, still not awesome but feasible options exist and perhaps more coming.
    So that path has to be weighed up in the decision too.

    Rambling finished.

    Cheers,
    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  6. #86
    Join Date
    Jun 2006
    Location
    Heathcote Junction
    Posts
    1,155
    Total Downloaded
    0
    Scott

    What size KO2's are they?
    Cheers

    Chuck

    MY 24 Grenadier Trialmaster
    MY 03 D2a
    Ex D1, D2, D2a, D3, D4, Prado, D4, D5, MY 23 Defender
    73 series 3 109 Truck Cab Tray Body, 79 Series, 76 Series

  7. #87
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by chuck View Post
    What size KO2's are they?
    265/60/R18

  8. #88
    Join Date
    Jan 2007
    Location
    Sydney
    Posts
    2,394
    Total Downloaded
    0
    Quote Originally Posted by Russrobe View Post
    Land Cruisers are spoilt for choice.
    They need it. An expression about lipstick and a pig comes to mind.

    Compomotives are actually very good value for the quality of wheel you get and I personally like the look. Classic and understated, perfect for a Land Rover.

    For me the only question is are they going to fit a D5?

    Cheers,
    Jon

  9. #89
    Join Date
    Aug 2007
    Location
    Bunbury, WA
    Posts
    2,507
    Total Downloaded
    0
    Quote Originally Posted by jon3950 View Post
    They need it. An expression about lipstick and a pig comes to mind.

    Compomotives are actually very good value for the quality of wheel you get and I personally like the look. Classic and understated, perfect for a Land Rover.

    For me the only question is are they going to fit a D5?

    Cheers,
    Jon
    Won't need 'em. It'll come with 16" wheels

  10. #90
    Join Date
    Jul 2013
    Location
    Perth
    Posts
    1,744
    Total Downloaded
    0
    I'm with you Andy I like the look of the compomotives. But there's no way I'll be getting a set for my D3 as I use 17" rims

    Sent from my GT-I9505 using AULRO mobile app
    Shane
    2005 D3 TDV6 loaded to the brim with 4 kids!
    http://www.aulro.com/afvb/members-rides/220914-too-many-defender-write-ups-here-time-d3.html

Page 9 of 32 FirstFirst ... 789101119 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!