FYRLYT installation Perth

That would be Mr Shiny Heads D4(Aaron40).
Andrew

Looks like neat work Tim. I'm still tossing up whether to get a bar and put lights on that, or just get lights with your brackets, or nothing at all. Decisions, decisions.

Quote:

---

Originally Posted by osborneparkautospark

Hi Greg

I've recently noticed your positive feedback after another customer mentioned there was favourable comments about us on this site. All of us here at Osborne Park Autospark appreciates it.

I thought I'd post up some photo's of a Fyrlyt install we carried out a while ago using our 5mm laser cut stainless bracket. We have revised this bracket since this photo and the mount now is a direct fit for all the new Lightforce 3 bolt mount.

Thanks again Greg

Tim

Osborne Park Autospark

https://www.aulro.com/afvb/images/im...017/03/305.jpg

https://www.aulro.com/afvb/images/im...017/03/306.jpg

https://www.aulro.com/afvb/images/im...017/03/307.jpg

https://www.aulro.com/afvb/images/im...017/03/308.jpg

---

Tim,

Can similar brackets be mounted onto a RR Sport (2016 L494 model)? Where do you recommend the 24v converters be mounted for the Nemesis 9000s?

Thanks

Quote:

---

Originally Posted by Brick

Tim,

Can similar brackets be mounted onto a RR Sport (2016 L494 model)? Where do you recommend the 24v converters be mounted for the Nemesis 9000s?

Thanks

---

Hi Cameron

We as yet have not had many requests for a light bracket for the current Range Rover Sport.

I do have a 2014 L494 RRS here today for accessory fit out which I've removed the grille for photo's for you.

I'm sure a bracket could be made utilizing the four screw mountings in the front bumper, the outer two screw mounts are especially solid.

The converter could be mounted either in the engine bay behind the RH strut tower or a better place would be inside the plenum chamber below the brake fluid reservoir.

Tim

Osborne Park Autospark

https://www.aulro.com/afvb/images/im...017/03/177.jpg

https://www.aulro.com/afvb/images/im...017/03/178.jpg

https://www.aulro.com/afvb/images/im...017/03/179.jpg

Keep the converters up the front if you can - in air flow for optimum performance.

Quote:

---

Originally Posted by osborneparkautospark

Hi Cameron

We as yet have not had many requests for a light bracket for the current Range Rover Sport.

I do have a 2014 L494 RRS here today for accessory fit out which I've removed the grille for photo's for you.

I'm sure a bracket could be made utilizing the four screw mountings in the front bumper, the outer two screw mounts are especially solid.

The converter could be mounted either in the engine bay behind the RH strut tower or a better place would be inside the plenum chamber below the brake fluid reservoir.

Tim

Osborne Park Autospark

https://www.aulro.com/afvb/images/im...017/03/177.jpg

https://www.aulro.com/afvb/images/im...017/03/178.jpg

https://www.aulro.com/afvb/images/im...017/03/179.jpg

---

Thanks for that Tim. Might pay you a visit when I am ready to install a set and get you to do it. Did it myself on my wife's Ford Ranger. Spent more time making up a bracket and installing and wiring up the circuit breakers, relays and converters than the rest of the install. Was very tight for space too. Not keen to repeat the experience. Great lights however.