Page 6 of 7 FirstFirst ... 4567 LastLast
Results 51 to 60 of 66

Thread: Gap Diagnostic IID Tool Questions

  1. #51
    Join Date
    Jun 2016
    Location
    Perth
    Posts
    27
    Total Downloaded
    0
    Has anyone been able to re-calibrate the fuel gauge or tank capacity? I have a long range tank gravity fed to main, would be awesome to re-calibrate so the dist to empty was closer to what it really is vs sitting on ~750kms for the whole of the aux tank then going down...

    I have 33s on my D3 and had to fix speedo as it was too far out. From memory it is the Tyre diameter that you change, worked perfectly

  2. #52
    Join Date
    Oct 2013
    Location
    Old Toongabbie, Sydney NSW
    Posts
    1,269
    Total Downloaded
    0
    Quote Originally Posted by dirvine View Post
    Thanks Martin, will give it a go!
    Hi Dirvine.

    I just updated my GAP IID Tool to the latest firmware and saw the special option. If you click on the button the description changes to "For Nav On Move Update Only". I knew I had seen it somewhere.

    Martin

  3. #53
    Join Date
    Jul 2013
    Location
    brisbane
    Posts
    191
    Total Downloaded
    0
    British offroad has quoted $950 incl delivery for the GAP IID tool BT version.....is it cheaper to buy it online?

  4. #54
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    4,089
    Total Downloaded
    0

    Gap Diagnostic IID Tool Questions

    Quote Originally Posted by letherm View Post
    Hi Dirvine.

    I just updated my GAP IID Tool to the latest firmware and saw the special option. If you click on the button the description changes to "For Nav On Move Update Only". I knew I had seen it somewhere.

    Martin
    If you try and enable this on a model and in a region where it’s not available it won’t work and you’ll get errors listed in the IIDTool. I tried it on mine in AU and it didn’t work.
    2010 TDV6 3.0L Discovery 4 HSE
    2007 Audi RS4 (B7)

  5. #55
    Join Date
    Feb 2009
    Location
    Canberra
    Posts
    115
    Total Downloaded
    0
    Quote Originally Posted by 4evershiva View Post
    British offroad has quoted $950 incl delivery for the GAP IID tool BT version.....is it cheaper to buy it online?
    Try emailing Dan at Duckworths in the UK (Dan.Roberts@duckworth.co.uk) and mention the AULRO forum. I paid 355 pounds (just shy of AS$640 at the time) inclusive of delivery for the GAP IID BT back in November 2017.

  6. #56
    Join Date
    Nov 2014
    Location
    Melbourne
    Posts
    112
    Total Downloaded
    0
    That is about what I paid from Duckworths in 2016. $950 seems way over the top.
    Mike

    MY14 TDV6, ARB Bar, Fyrlyt's, 18" Compomotove Rims. 265/60/18 BFG KO2's, Front Runner roof rack, removable rear false floor.

  7. #57
    BradC is offline Super Moderator
    No one of consequence
    Supporter
    Join Date
    Mar 2018
    Location
    Perth (near Malaga)
    Posts
    2,862
    Total Downloaded
    0
    I bought straight from Gap in Canada. It was the cheapest at the time, came with free shipping and arrived in a matter of days.

  8. #58
    Join Date
    Oct 2013
    Location
    Old Toongabbie, Sydney NSW
    Posts
    1,269
    Total Downloaded
    0
    Quote Originally Posted by Mike57 View Post
    That is about what I paid from Duckworths in 2016. $950 seems way over the top.
    +1

    Duckworths were the cheapest when I bought mine too. As earlier posted e-mail Dan and mention the forum.

    Martin

  9. #59
    Join Date
    Oct 2012
    Location
    Gold Coast
    Posts
    136
    Total Downloaded
    0

    TO CHANGE HEIGHT CALIBRATION

    Quote Originally Posted by Ferret View Post
    What you use the tool for is to change the height calibration, not the specifically the height as such. That is still controlled by the vehicle.

    For instance if you change the height calibration by +50mm, your normal on road height will be recalibrated +50mm higher than before. Once the vehicle detects it is now below its normal on road height calibration it will raise itself an additional +50mm. That additional +50mm is now equivalent to off road height but because the vehicle thinks it is at on road height it will not lower if you exceed 50k/hr

    Because all you do is change the height calibration (or height off set) every thing works the same as before. So if you go into off road height it will now be at off road height plus (or minus) the off set you have choosen with the IID tool but it will still lower automatically at 50k/hr.

    For safety reason you can not choose greater than +50mm off set.
    To Change the height Calibration do you just need the ignition ON - OR does the engine need to be running so it will activate the
    compressor ?

  10. #60
    Join Date
    Nov 2014
    Location
    Melbourne
    Posts
    112
    Total Downloaded
    0
    I think I did mine with the engine running so not sure if it works without it running.
    Mike

    MY14 TDV6, ARB Bar, Fyrlyt's, 18" Compomotove Rims. 265/60/18 BFG KO2's, Front Runner roof rack, removable rear false floor.

Page 6 of 7 FirstFirst ... 4567 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!