Page 7 of 7 FirstFirst ... 567
Results 61 to 66 of 66

Thread: Gap Diagnostic IID Tool Questions

  1. #61
    Join Date
    Feb 2007
    Location
    Perth
    Posts
    3,807
    Total Downloaded
    0
    Quote Originally Posted by orangepop View Post
    To Change the height Calibration do you just need the ignition ON - OR does the engine need to be running so it will activate the
    compressor ?
    Pretty sure you only the ignition on to change the calibration but the engine needs to be on before the vehicle will actually respond to the change in calibration.
    2011 D4 3.0 SDV6
    1999 D2 V8, in heaven
    1984 RRC, in hell

  2. #62
    Join Date
    Oct 2012
    Location
    Gold Coast
    Posts
    136
    Total Downloaded
    0
    Got it sorted thanks. Left the engine running so it’s raised the suspension once the raise all command was completed. Have to say the BT App to do this is far from intuitive.

  3. #63
    Join Date
    Jan 2017
    Location
    Whitsundays
    Posts
    175
    Total Downloaded
    0
    Will work either way but you dont want to risk a flat battery so fire it up so you you can get the compressor going you can then jump out and marvel at your new lift. Cut loose. In fact stand outside the car with your phone and play with it. The default LR heights are logged straight up so you can’t bugger anything up. Goodbye to 50klm per messages telling you to slow down before it gets a sad face when off road. Ive got a 20, 35 and 50 height setting all saved. Pretty decent.

  4. #64
    Join Date
    Oct 2011
    Location
    Hunter Valley
    Posts
    513
    Total Downloaded
    0
    The IIDTool will tell you if it needs just ignition on or engine started. I reset the service interval indicator on a D3 last week with running engine, then the phone app displays a message to turn the engine off and turn ignition on. On a D4, the IIDTool would probably do this by itself as there's no key in the ignition.

    Ron
    2016 D4 TDV6 Corris Grey
    --------------------------------------------------------
    2018 D5 TD6 SE Silicon Silver - gone
    2011 D4 TDV6 2.7 Indus Silver - gone
    IIDTool BT

  5. #65
    Join Date
    Jan 2016
    Location
    NSW
    Posts
    103
    Total Downloaded
    0
    Anyone know if (and how) you can set buttons on the key fob to lower the car to access level or raised levels? Would be a handy thing sometimes when loading the car with gear and or people.

  6. #66
    Tombie Guest
    Quote Originally Posted by DrOsteo View Post
    Anyone know if (and how) you can set buttons on the key fob to lower the car to access level or raised levels? Would be a handy thing sometimes when loading the car with gear and or people.
    There’s a sequence already available.
    It’s in your handbook.
    Needs the hazards on, so really only helpful for hitching a trailer.

Page 7 of 7 FirstFirst ... 567

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!