Results 1 to 7 of 7

Thread: Brake Fluid Flush

  1. 24th April 2017, 11:14 AM #1
    Ean Austral Guest

    Brake Fluid Flush

    Gday All,

    Has anyone done their own brake fluid flush ? I know I did it a couple of times on the D2 but there was a easy way linking a on/off switch to the fuse .

    Anyone done similar with the D3 ?

    Cheers Ean
    Reply With Quote Reply With Quote
  2. 24th April 2017, 11:28 AM #2
    PerthDisco's Avatar
    PerthDisco
    PerthDisco is offline ChatterBox Subscriber
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,700
    Total Downloaded
    0

    Brake Fluid Flush

    Ean - Bodsy covers this http://media.disco3.co.uk/gallery/al...sPicsSmall.pdf
    Reply With Quote Reply With Quote
  3. 24th April 2017, 11:51 AM #3
    DiscoJeffster
    DiscoJeffster is offline TopicToaster Subscriber
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    4,335
    Total Downloaded
    0
    IIDTool now offers a bleed function to assist the process. Haven't used it yet.
    2010 TDV6 3.0L Discovery 4 HSE
    2007 Audi RS4 (B7)
    Reply With Quote Reply With Quote
  4. 24th April 2017, 12:55 PM #4
    Ean Austral Guest
    Quote Originally Posted by PerthDisco View Post
    Ean - Bodsy covers this http://media.disco3.co.uk/gallery/al...sPicsSmall.pdf
    Yep, that's the way I would normally have done it. Pretty fail safe method so that's the way I will go.

    I never bothered to check if my Hawkeye has the bleed function - but highly unlikely.

    Cheers Ean
    Reply With Quote Reply With Quote
  5. 24th April 2017, 08:22 PM #5
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Nanocom had a brilliant flush for the D2,made it so easy to clean the brake fluid at every service.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  6. 24th April 2017, 08:31 PM #6
    kenl
    kenl is offline Master Supporter
    Join Date
    Dec 2009
    Location
    SW WA
    Posts
    345
    Total Downloaded
    0
    The D2 and the Nanocom were perfect for bleeding/flushing the brake fluid solo.

    But I have not seen the same in the IID tool or MSV2, they seem to have a bleed function but the instructions tell you to bleed the brakes in the standard way (2 people ) instead of using the ASB pump? Am I missing something?
    Reply With Quote Reply With Quote
  7. 24th April 2017, 10:04 PM #7
    DiscoJeffster
    DiscoJeffster is offline TopicToaster Subscriber
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    4,335
    Total Downloaded
    0
    The IID function seems to have been designed for part replacement (such as replacing the ABS servo), however even if you bleed normally, this function should feature in the process to ensure the fluid in the abs servo is cleared and refreshed.
    2010 TDV6 3.0L Discovery 4 HSE
    2007 Audi RS4 (B7)
    Reply With Quote Reply With Quote
« Winch Install | Firewall alternative for running cable. »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!