Quote Originally Posted by shamirj View Post
hi all,

Having installed 2x safari snorkels on previous model Discovery's (D3), I have just fitted a RAI on my current Disco 4. Very easy to install and much quicker though I know its not a snorkel per se. My question to those who have fitted themselves, as mine was a used unit, is there supposed to be a small gap between the snorkel and the original LR plumbing. When i fit the snorkel to the outside vent, there is a small gap of approx 1inch between it (inner face) and the rubber which attaches to the end of the original LR tubing inside the cavity. I have sealed the RAI onto the guard fine, prob appears to be on the inner face of the RAI which has no attachment points to secure the plumbing. thank you
Hi Garry, you need 2 x additional parts. LR013711 and PHD000714