Thread: D3 mud flaps

These are in the other thread/s but to save you time, here are the part numbers

Pre TD5 Defender 90 rears :

*Genuine with LR logo*
LR055332 (RHS)
CAT500450PMA (LHS)

Generic without the LR logo are much cheaper (like $20 vs $48) - you can see multiple options here: LR055332 | Mudflap - Land Rover Part LR055332

D1 fronts
Front mudflaps D1 RTC6820

I bought these generic ones for the front: LAND ROVER DISCOVERY 1 FRONT MUDFLAP KIT`89 to`98 | eBay

David

Originally Posted by Russrobe

You can also just get two of the same
CAT500450PMA (LHS) and cut your own exhaust cutout.

If you get the two different rears make sure you line up the pre-existing cutout to the correct side before making the cutouts for the exhausts!

And use some decent side cutters.

I’m guessing there must be some differences in the LR and non-LR versions (or perhaps even just different LR versions?) as the (LR) ones I bought didn’t have a cutout and were also ribbed on one side with the LR logo on the other side, so therefore not able to be swapped across to the other side. I made a cardboard template for mine and cut them with a Stanley knife (probably a bit larger cutouts than was really necessary).

David

IMG_9308.jpgIMG_9304.jpgIMG_9305.jpgIMG_9306.jpg