replacement front diff breather Disco 3 and 4

Quote:

---

Originally Posted by Redtail

Was that an online store? If so, may we have the link?

---

Got mine from Rimmerbros.

Quote:

---

Originally Posted by PerthDisco

Since all the old style breathers people have removed have been totally blocked the saviour must be a very tiny air volume as seal and diff failure rates should almost be on an epidemic level otherwise.

---

Yes.. that may be the case. Perhaps it’s also few running them into cold water (shock) which will contract quickly!

Wondered what that was when changing coolant bottle yesterday

Don't delay doing this job people, I just cut off my old filter and heard a big suction sound come from the pipe. Poor diff was starving for air. Off to the shops for a replacement.

God knows why I left it so long, even though the filter looks clean inside I couldn't blow or suck any air through at all.

Quote:

---

Originally Posted by Russrobe

Don't delay doing this job people, I just cut off my old filter and heard a big suction sound come from the pipe. Poor diff was starving for air. Off to the shops for a replacement.

God knows why I left it so long, even though the filter looks clean inside I couldn't blow or suck any air through at all.

---

At least you know the diff seals are working!

Quote:

---

Originally Posted by Disco-tastic

At least you know the diff seals are working!

---

Seeing as mine was clean, I'm going to track down the rear and replace that too. I can't see how it's any different, most likely completely blocked.

Quote:

---

Originally Posted by Russrobe

Seeing as mine was clean, I'm going to track down the rear and replace that too. I can't see how it's any different, most likely completely blocked.

---

Let me know when you find it

Me too. I went looking and it seems to be around the fuel filler, but it appears you need to remove the wheel arch liner to get to it.

Anyone else managed to find the rear diff breather or the transfer case breather?

I ran out of time the other week when doing the upper control arms... It's still on my to do list though!