How long does your battery last when idle

My CTek works!

https://www.aulro.com/afvb/images/im...018/01/410.jpghttps://www.aulro.com/afvb/images/im...018/01/411.jpghttps://www.aulro.com/afvb/images/im...018/01/412.jpg

Quote:

---

Originally Posted by DI5CO

My CTek works!

https://www.aulro.com/afvb/images/im...018/01/410.jpghttps://www.aulro.com/afvb/images/im...018/01/411.jpghttps://www.aulro.com/afvb/images/im...018/01/412.jpg

---

What brand phone are you using? I've since done some Googling, and there are issues with the app, and samsung phones.

Quote:

---

Originally Posted by Aussie Jeepster

What brand phone are you using? I've since done some Googling, and there are issues with the app, and samsung phones.

---

That’s an iPhone.

Quote:

---

Originally Posted by DI5CO

My CTek works!

---

Hi DI5CO,
I have bought a couple of the ctek monitors. I now see that their connectors are small and circular and cannot see any direct connections at the battery terminals. How did you connect yours (do you have any pictures)?

TIA,
Peter

Quote:

---

Originally Posted by Learner

Hi DI5CO,
I have bought a couple of the ctek monitors. I now see that their connectors are small and circular and cannot see any direct connections at the battery terminals. How did you connect yours (do you have any pictures)?

TIA,
Peter

---

I connected mine to the ground stud in front of the battery box (bottom right of pic) and to the positive feed into the fusebox- see pic. For the aux battery I took positive from the breaker on my Traxide DT-90. https://www.aulro.com/afvb/images/im...018/02/686.jpg
David

Hi David,
Thanks for your helpful reply.

Best Wishes,
Peter

Hi Peter
I just cut with pliers the end of the wire connector to spread it and make it bigger then just screwed it on that way. I don’t have a pic and I’m not near the car so will try to take one. Hope that makes sense lol
Dave.

Hi Dave,
I am fairly sure that I know what you mean. (Probably earlier) photos on the ctek site show the terminals much as you describe. I am hesitant to modify the terminals until I can prove that they work (as I have a Samsung phone).

Thanks,
Peter

Quote:

---

Originally Posted by Learner

Hi DI5CO,
I have bought a couple of the ctek monitors. I now see that their connectors are small and circular and cannot see any direct connections at the battery terminals. How did you connect yours (do you have any pictures)?

TIA,
Peter

---

Hi Peter,
You've probably sorted your Ctek CTX battery sense terminals but for the benefit of others, I dremmeled the inner diameter of the M6 terminals to create M8 terminals. See pictures, black original M6 and Red dremmeled now M8

Attachment 137872Attachment 137873

Quote:

---

Originally Posted by Tankmat

Hi Peter,
You've probably sorted your Ctek CTX battery sense terminals but for the benefit of others, I dremmeled the inner diameter of the M6 terminals to create M8 terminals. See pictures, black original M6 and Red dremmeled now M8


Attachment 137872Attachment 137873

---

Thanks Tankmat. Where did this allow you to fit it?

I don't want to modify the unit before I establish that the software works with Samsung phones.

Best Wishes,
Peter