Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: D4 Air Suspension

  1. #1
    Join Date
    Feb 2016
    Location
    Melbourne
    Posts
    271
    Total Downloaded
    0

    D4 Air Suspension

    I've noticed the car looking a little lop sided yesterday.
    So I measured from the concrete to wheel arch on all 4 wheels.
    Passenger side is sitting 20mm lower front & back than driver side.
    I haven't investigated fully yet but any thoughts would be appreciated.

  2. #2
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,456
    Total Downloaded
    0
    It would be prudent to fit the Llams loop-back plug to remove its signal processing from the system so that correct diagnosis of the cause can occur. Perhaps 1 height sensor is causing the whole side to be higher or lower than it should be.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  3. #3
    Join Date
    Feb 2016
    Location
    Melbourne
    Posts
    271
    Total Downloaded
    0
    Quote Originally Posted by Graeme View Post
    It would be prudent to fit the Llams loop-back plug to remove its signal processing from the system so that correct diagnosis of the cause can occur. Perhaps 1 height sensor is causing the whole side to be higher or lower than it should be.
    Hi Graeme
    I don't quite understand what you mean by, "to fit the Llams loop-back plug".
    Vin

  4. #4
    Join Date
    Jan 2015
    Location
    Sydney
    Posts
    885
    Total Downloaded
    0
    The loopback plug effectively removes the LLAMS module from interacting with the car's electronics.

    So you unplug the wiring loom from the (black box) module and plug the loopback plug into the plug you just removed from the module. See pic

    llams2 loopback.jpg

    David
    Everything is easy when someone else is doing it
    MY14 SDV6 SE Corris Grey
    Compomotive 18s : D697s : Traxide DBS : LLAMS : ARB compressor : IC-450N
    Rhino Platform : GOE compressor, Tx & front bash plates, deluxe sliders

  5. #5
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,456
    Total Downloaded
    0
    Attach the loop-back plug to the Llams loom instead of the black box (module) to exclude Llams electronics.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  6. #6
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    4,066
    Total Downloaded
    0
    Does the OP have LLAMS?
    2010 TDV6 3.0L Discovery 4 HSE
    2007 Audi RS4 (B7)

  7. #7
    Join Date
    Jan 2015
    Location
    Sydney
    Posts
    885
    Total Downloaded
    0
    Quote Originally Posted by DiscoJeffster View Post
    Does the OP have LLAMS?
    OP rhinosm signature:
    2016 SDV6SE D4
    Mitch Hitch, Llams, IID Tool, Traxide, Tow Pro, GME UHF,
    Rhino Traddie Rack, 19" Duratracs, ARB Bull Bar, Runva 11XP, APT Sliders

    Everything is easy when someone else is doing it
    MY14 SDV6 SE Corris Grey
    Compomotive 18s : D697s : Traxide DBS : LLAMS : ARB compressor : IC-450N
    Rhino Platform : GOE compressor, Tx & front bash plates, deluxe sliders

  8. #8
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    4,066
    Total Downloaded
    0
    Ah can’t see that from Tap. Soz
    2010 TDV6 3.0L Discovery 4 HSE
    2007 Audi RS4 (B7)

  9. #9
    Join Date
    Feb 2016
    Location
    Melbourne
    Posts
    271
    Total Downloaded
    0
    So I should have the loop back plug? I best have a good look.
    Vin

  10. #10
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,456
    Total Downloaded
    0
    Yes, you should have one but if not then PM me your address and I'll send you one.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!