Thread: Caravan camera Safety Dave wiring access / Power and Earth access D4

Switched power can be tapped on the 12S socket

Access into cabin behind tail lights via loom grommet.

Thanks Tombie mate.
Good on you.

Hi Baytown,
I have installed a Safety Dave system.
Picked up power from the loom (feeding orig towing socket) inside LHS rear quarter panel . Ran this and video cables to front cabin light panel (where my screen is located) through the roof lining via the "C" pillar. Video cable exited body through grommet behind LHS tail light assy as Tombie has suggested. I use the screen as a rear view mirror when the van is on. Works a treat.
By the way check AULRO for the preferred method to install the van brake controller so there are no surprises.
Cheers
GIL

Originally Posted by Baytown

Ive purchased an Safety Dave Caravan camera loom and monitor.

Probably a bit late Ken but do you have a factory reverse camera that you can access any time via a button on the factory screen?

I know this functionality is available from MY14 but not sure about 13. Anyway if you do it is possible to select between an external video source (van camera in this case) and the factory reverse camera meaning you don't require an extra monitor screen. In the thread linked below there's two methods detailed.

Switching another camera on to the D4 screen

Regards,
Scott