I'm Back!!!.... 2005 Disco 3 Issues Transfer Box

Quote:

---

Originally Posted by BusinessConnected

Resolved the Issue with the Parking Brake Today.
I purchased a MaxiDas DS808 Scan Tool off Ebay (I wanted something with most of the Land Rover Functions but also something to work with other vehicles too).

Code for Parking Brake ended up being U2002 - Switch Issue.
Ended up researching and found posts about issues with the Loom etc...

Got the Car on the Jack and ended up discovering the Connector for the Electronic Park Brake under the Left Hand Side Wheel Arch was partially unplugged because the Plugs/Connections were damaged/sheared off.
3/4 Well Placed Cable Ties have secured that up nicely.. I'll see how that goes longer term... if its an issue I guess I'll need to replace that connector somehow.

---

Well done hopefully a cheap easy fix [thumbsupbig]

New Transfer Case ECU Arrived Today.
Fitted to the Car... Reduced the errors back to Range Change Issues.
Performed "Transfer Case Replacement" Procedure with the MaxiDas DS808 and the errors have all disappeared.

Hopefully that resolves the issue for good.

Quote:

---

Originally Posted by BusinessConnected

New Transfer Case ECU Arrived Today.
Fitted to the Car... Reduced the errors back to Range Change Issues.
Performed "Transfer Case Replacement" Procedure with the MaxiDas DS808 and the errors have all disappeared.

Hopefully that resolves the issue for good.

---

Just as a matter of curiosity, What did the ECU set you back? I've got mine booked in at Ritters in a couple of weeks to have mine replaced. Quoting $650 including coding (I don't have the right software) Cheapest I could find was around the $450 mark, is that sounding about right?

Quote:

---

Originally Posted by mitchE39

Just as a matter of curiosity, What did the ECU set you back? I've got mine booked in at Ritters in a couple of weeks to have mine replaced. Quoting $650 including coding (I don't have the right software) Cheapest I could find was around the $450 mark, is that sounding about right?

---

Can it be done with a GAP tool ?

Quote:

---

Originally Posted by mitchE39

Just as a matter of curiosity, What did the ECU set you back? I've got mine booked in at Ritters in a couple of weeks to have mine replaced. Quoting $650 including coding (I don't have the right software) Cheapest I could find was around the $450 mark, is that sounding about right?

---

I ordered mine from the UK Used on Ebay. Ended up being around $150 Inc GST Charges etc..

There's another one on Ebay now for the around the same price (maybe even cheaper).
LAND ROVER DISCOVERY 3 INTEGRATED TRANSFER CASE NN502932 | eBay