Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: I'm Back!!!.... 2005 Disco 3 Issues Transfer Box

  1. #11
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,148
    Total Downloaded
    0
    Quote Originally Posted by BusinessConnected View Post
    Resolved the Issue with the Parking Brake Today.
    I purchased a MaxiDas DS808 Scan Tool off Ebay (I wanted something with most of the Land Rover Functions but also something to work with other vehicles too).

    Code for Parking Brake ended up being U2002 - Switch Issue.
    Ended up researching and found posts about issues with the Loom etc...

    Got the Car on the Jack and ended up discovering the Connector for the Electronic Park Brake under the Left Hand Side Wheel Arch was partially unplugged because the Plugs/Connections were damaged/sheared off.
    3/4 Well Placed Cable Ties have secured that up nicely.. I'll see how that goes longer term... if its an issue I guess I'll need to replace that connector somehow.
    Well done hopefully a cheap easy fix

  2. #12
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    336
    Total Downloaded
    0
    New Transfer Case ECU Arrived Today.
    Fitted to the Car... Reduced the errors back to Range Change Issues.
    Performed "Transfer Case Replacement" Procedure with the MaxiDas DS808 and the errors have all disappeared.

    Hopefully that resolves the issue for good.

  3. #13
    Join Date
    Feb 2014
    Location
    Northcote, VIC
    Posts
    98
    Total Downloaded
    0
    Quote Originally Posted by BusinessConnected View Post
    New Transfer Case ECU Arrived Today.
    Fitted to the Car... Reduced the errors back to Range Change Issues.
    Performed "Transfer Case Replacement" Procedure with the MaxiDas DS808 and the errors have all disappeared.

    Hopefully that resolves the issue for good.
    Just as a matter of curiosity, What did the ECU set you back? I've got mine booked in at Ritters in a couple of weeks to have mine replaced. Quoting $650 including coding (I don't have the right software) Cheapest I could find was around the $450 mark, is that sounding about right?

  4. #14
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,027
    Total Downloaded
    0
    Quote Originally Posted by mitchE39 View Post
    Just as a matter of curiosity, What did the ECU set you back? I've got mine booked in at Ritters in a couple of weeks to have mine replaced. Quoting $650 including coding (I don't have the right software) Cheapest I could find was around the $450 mark, is that sounding about right?
    Can it be done with a GAP tool ?
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  5. #15
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    336
    Total Downloaded
    0
    Quote Originally Posted by mitchE39 View Post
    Just as a matter of curiosity, What did the ECU set you back? I've got mine booked in at Ritters in a couple of weeks to have mine replaced. Quoting $650 including coding (I don't have the right software) Cheapest I could find was around the $450 mark, is that sounding about right?
    I ordered mine from the UK Used on Ebay. Ended up being around $150 Inc GST Charges etc..

    There's another one on Ebay now for the around the same price (maybe even cheaper).
    LAND ROVER DISCOVERY 3 INTEGRATED TRANSFER CASE NN502932 | eBay

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!