Just this cheapy, I bought 4 in case they were rubbish but it works OK.https://uploads.tapatalk-cdn.com/201...31ad085cef.jpg
Printable View
Just this cheapy, I bought 4 in case they were rubbish but it works OK.https://uploads.tapatalk-cdn.com/201...31ad085cef.jpg
Ta mate!Quote:
Originally Posted by loanrangie
Can't even find those listed on jaycar website. Have to go to the one enar home tomorrow so will ask in store.
The pic above isn't from Jaycar or ebay, just a chinese site i found.Quote:
Originally Posted by PeterOZ
I should add that you need to have added an aux. input to the stereo if yours doesn't have one already.
Across pins 2 & 3 in Ohms:
No Buttons pressed = 30.67KΩ
|<< = 2.052KΩ
>>|= 3.067KΩ
Vol+ = 4.606KΩ
Vol- = 336.7Ω
Mode = 1.318KΩ
If you don't plan on fitting the switch panel i'll take it off your hands when you're done.Quote:
Originally Posted by rangeyrover
https://www.aulro.com/afvb/images/misc/quote_icon.png Originally Posted by loanrangie https://www.aulro.com/afvb/images/bu...post-right.png
I dont have the audio buttons but have done the aux input mod and use a $3 BT adapter for streaming to my CD400.
I bought a$50 bluetooth unit (switchable from receiver to transmitter) from Jaycar electronics. Plugs into the aux input jack in the car. Phone picks this up and I can now stream music via bluetooth . Calls as well afaik.
If you are just after bluetooth phone calls, they also have these for about 25 bucks
meant the one Eric got from jaycar
I will try to post a photo of the unit I've got and get you a part number.Quote:
Originally Posted by PeterOZ
Cheers
Eric
Hi All,
I've made some good progress with this.
The device accepts the steering wheel controls and changes tracks.
It works by the arduino reading the steering wheel controls then activating the next prev track switches & Play/Pause on the module.
I've also designed a pcb to make it a neater solution than my prototype.
So it's met my basic goals, this is V1 then.
https://i.ibb.co/30Sp9hS/941817badd8...428cd6c8c7.png
https://i.ibb.co/j8wDQT0/CD400-Bluetooth.png
https://i.ibb.co/5YqsmrN/ff9d10be7ea...7cc61c8a10.png
Also Kicad files:
Attachment 148725
Attachment 148725Attachment 148725
New goals for V2:
Make it read the front buttons on the head uint.
Make the mic work
Use the mute function to make calls
Hi All,I've made some good progress with this.The device accepts the steering wheel controls and changes tracks.It works by the arduino reading the steering wheel controls then activating the next prev track switches & Play/Pause on the module.I've also designed a pcb to make it a neater solution than my prototype.So it's met my basic goals, this is V1 then.https://i.ibb.co/30Sp9hS/941817badd8...428cd6c8c7.pnghttps://i.ibb.co/j8wDQT0/CD400-Bluetooth.pnghttps://i.ibb.co/5YqsmrN/ff9d10be7ea...7cc61c8a10.pngAlso Kicad files:New goals for V2:Make it read the front buttons on the head uint.Make the mic workUse the mute function to make calls
