12V switched power

This is what I fitted in the front and the back.
All the wiring is already there on a 2006 SE model.
Attachment 153585

Attachment 153586

Quote:

---

Originally Posted by Graeme

I suggest that you fit an add-a-fuse to an appropriate fuse in the passenger compartment fuse panel, located behind the glove box. There is an ignition fuse but probably better to choose an accessory-powered fuse which stays powered for a short while after the ignition is switched off.

---

I did exactly as Graeme described, used fuse #21, accessory-powered. The negative was earthed via a chassis factory screw at the bottom right of the glovebox. Very easy jobhttps://www.aulro.com/mobile-gallery...3879dbc261.jpg

Radios (comms) should be wired directly to the battery for best performance.