I don't see the point in disabling it, everyone in the car should have a belt on or put bags on the floor.
Not sure if posted before (I did do bit of a search first) but this is how you can disable the seat belt warning chimes.
1. Ignition on (not started)
2. Insert and releaseseatbelt9 times...then you will hear a single chime to indicate its disabled.
Job done
Sorry if its a safety feature but it annoys me, cheers.
2007 D3 SE 4.0l
I don't see the point in disabling it, everyone in the car should have a belt on or put bags on the floor.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
That was the first thing I did on my RRS when I got it - that chime is very annoying. The seat belt light on the dash remains which is fine.
I just wish there was a similar fix for the key in ignition, drivers door open chime.
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
MY14 D4, I turned off the seat belt chime in the CCF via my Nanocom. The light remains on the dash which is fine by me.
Chris
2014 D4 TDV6
1954 86"
1963 2A Forward Control (getting the full treatment, Isuzu 4JH1, MYY5T, LT230, Toyota Axles, extended cab ++)
1980 Stage 1 v8 (gone)
Just did it and it worked like a chime...
I had tried previously unsuccessfully but worked this time round, thanks for the suggestion...
Land Rover
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks