You could also get a little bungie cord, like on the ute tarps to hold it in place.
I have been storing my bottle jack in the rear side pocket where the LR jack was stored. But with the drawers I have to remove the fridge and undo the tie down to access it. I had a big clean. I removed the drawers. When I replaced them I thought, “that might be a great spot to store the jack.” Four s/steel saddles through bolted. A couple of heavy-duty cable ties and presto. Need the jack. Cut the cable ties use it the re-mount with new cable ties.
MY08 TDV6 D3 Zermatt Silver, B.A.S ECU Remap, ARB Bar, 12K Kingone Winch, 2x100Ah LiFePo4 Auxiliary Power, Safari Snorkel, Baja Rack Roof Rack, Brown Davis Aux. Tank, RWC, Front Runner Rear Ladder, Drifta Drawers, Doran TPMS, LLAMS, GAP IID BT.
You could also get a little bungie cord, like on the ute tarps to hold it in place.
MY08 TDV6 D3 Zermatt Silver, B.A.S ECU Remap, ARB Bar, 12K Kingone Winch, 2x100Ah LiFePo4 Auxiliary Power, Safari Snorkel, Baja Rack Roof Rack, Brown Davis Aux. Tank, RWC, Front Runner Rear Ladder, Drifta Drawers, Doran TPMS, LLAMS, GAP IID BT.
Hi,
Have you thought about a strap and over center buckle?
Cheers
I use the 'o' ring /seal from my oil or fuel filter to hold my 12t hydraulic jack in place. Works well and can be replaced when needed at the next filter change.
Roger
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks