Results 1 to 6 of 6

Thread: I might have found the perfect spot for my bottle jack.

  1. #1
    Join Date
    Jul 2016
    Location
    Blackstone
    Posts
    451
    Total Downloaded
    0

    I might have found the perfect spot for my bottle jack.

    I have been storing my bottle jack in the rear side pocket where the LR jack was stored. But with the drawers I have to remove the fridge and undo the tie down to access it. I had a big clean. I removed the drawers. When I replaced them I thought, “that might be a great spot to store the jack.” Four s/steel saddles through bolted. A couple of heavy-duty cable ties and presto. Need the jack. Cut the cable ties use it the re-mount with new cable ties.
    Attached Images Attached Images
    MY08 TDV6 D3 Zermatt Silver, B.A.S ECU Remap, ARB Bar, 12K Kingone Winch, 2x100Ah LiFePo4 Auxiliary Power, Safari Snorkel, Baja Rack Roof Rack, Brown Davis Aux. Tank, RWC, Front Runner Rear Ladder, Drifta Drawers, Doran TPMS, LLAMS, GAP IID BT.

  2. #2
    Join Date
    Jun 2009
    Location
    Tangambalanga
    Posts
    7,558
    Total Downloaded
    0
    You could also get a little bungie cord, like on the ute tarps to hold it in place.

  3. #3
    Join Date
    Jul 2016
    Location
    Blackstone
    Posts
    451
    Total Downloaded
    0
    Quote Originally Posted by Chops View Post
    You could also get a little bungie cord, like on the ute tarps to hold it in place.
    That as my first thought, but could’t get enough stretch in the confined space to hold it steady.
    MY08 TDV6 D3 Zermatt Silver, B.A.S ECU Remap, ARB Bar, 12K Kingone Winch, 2x100Ah LiFePo4 Auxiliary Power, Safari Snorkel, Baja Rack Roof Rack, Brown Davis Aux. Tank, RWC, Front Runner Rear Ladder, Drifta Drawers, Doran TPMS, LLAMS, GAP IID BT.

  4. #4
    Join Date
    Jul 2009
    Location
    Hobart
    Posts
    3,300
    Total Downloaded
    0
    Hi,
    Have you thought about a strap and over center buckle?
    Cheers

  5. #5
    Join Date
    Jul 2016
    Location
    Blackstone
    Posts
    451
    Total Downloaded
    0
    Quote Originally Posted by austastar View Post
    Hi,
    Have you thought about a strap and over center buckle?
    Cheers
    I like that idea.
    MY08 TDV6 D3 Zermatt Silver, B.A.S ECU Remap, ARB Bar, 12K Kingone Winch, 2x100Ah LiFePo4 Auxiliary Power, Safari Snorkel, Baja Rack Roof Rack, Brown Davis Aux. Tank, RWC, Front Runner Rear Ladder, Drifta Drawers, Doran TPMS, LLAMS, GAP IID BT.

  6. #6
    Join Date
    Jan 1970
    Location
    Normanhurst, NSW
    Posts
    10,149
    Total Downloaded
    0
    I use the 'o' ring /seal from my oil or fuel filter to hold my 12t hydraulic jack in place. Works well and can be replaced when needed at the next filter change.
    Roger


Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!