Thread: What happened to your D3/D4 today?

Originally Posted by josh.huber

I must have the perfect size extensions..I can get mine out in under 5 minutes. I just wish I didn't have so much experience lately

Wobble bar extensions are your friend. Get some people if you don’t have them and slotting the top hole.

Originally Posted by DiscoJeffster

Wobble bar extensions are your friend. Get some people if you don’t have them and slotting the top hole.

AMK compressor comes out by taking off the spring mounts and sliding the unit back off the bracket which stays in place. Easy.

I’ve also read this compressor is not easily maintained beyond the dryer unlike the Hitachi.
Hence not trying to work on the motor or piston. It’s also less than 3 years since installed.

BCB5956F-B72B-4D83-BF24-1E66F9FD5AED.jpgD97FE132-26E0-4E4F-9595-7507E91EF9D1.jpgDid this

Found a dot of oil in the shed, initial checks indicate I've joined the oil cooler club , yay for me. I hear the joining ceremony strips you of your will to live!

Originally Posted by josh.huber

Found a dot of oil in the shed, initial checks indicate I've joined the oil cooler club , yay for me. I hear the joining ceremony strips you of your will to live!

It can be a number of things. If it is that, check by getting a wire coat hanger down deep in the v and see if there a depth of oil. It will build up in the v before overflowing.

Took it on a short run to Quorn for “Rock the Ranges”



Couple of nights of good company, a day of live music and a quick run home via Melrose for coffee at Over the Edge.

Originally Posted by DiscoJeffster

It can be a number of things. If it is that, check by getting a wire coat hanger down deep in the v and see if there a depth of oil. It will build up in the v before overflowing.

V is full mate, I've got a nice smear of oil down both sides. Put the camera on it. Most be her. Everything else above it is dry. Even the inlet manifold thingy I just resealed.. Everything else is beautiful. Well except the compressor I rebuilt for no reason..

Just tried to buy Castrol 5-30WA5 engine oil at SC and no stock and said none in any other store and not making it anymore.

Looks like I’m switching to Penrite HPR5 5-40W.