Page 663 of 663 FirstFirst ... 163563613653661662663
Results 6,621 to 6,626 of 6626

Thread: What happened to your D3/D4 today?

  1. #6621
    BradC is offline Super Moderator
    No one of consequence
    Supporter
    Join Date
    Mar 2018
    Location
    Perth (near Malaga)
    Posts
    3,809
    Total Downloaded
    0
    Quote Originally Posted by John_D4 View Post
    I guess I’m never selling this car
    I went out for a beer and steak with a mate tonight. He was "Mr Getter Outter" in Perth. Made half a mortgage removing snapped studs for one of the Landrover franchises in Perth and always said "Don't buy one of those pieces of crap" (most were TD5s but the TDV6 is worse). I bought the D3 in 2017 and he just shook his head. He sold his 100 series and went to an Isuzu MUX via a Mazda ute and Prado.

    A few years ago he got knocked off his bike and run over. After a knee replacement he's still not great. He got into the car and said "This is the only car I've been able to get in with enough room for my knee. When he got out he commented on how much he loved the ride.

    I know from a maintenance perspective it's not great, but that's mainly because the people we (and the previous owners) trusted to maintain it were "not ideal".

    I both love and hate my D3, but the longer I own it the more it tilts away from "hate". It helps I enjoy working on it I suppose. I have no intention of selling it. I'll drive it until I can't keep it on the road.
    MY08 D3 - The Antichrist - "Permagrimace". Turn the key and play the "will it get me home again" lottery.

  2. #6622
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,918
    Total Downloaded
    1.13 MB
    That's the lowers done, will do the uppers when I swap the arms over.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  3. #6623
    Narangga's Avatar
    Narangga is offline TopicToaster Silver Subscriber
    Join Date
    Jun 2008
    Location
    McMinns Lagoon NT
    Posts
    4,550
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    Run slightly more pressure 2-4psi and it’ll improve.
    Have been running 4psi more and I can certainly notice a slight decrease in noise, however as the D3 does travel huge kms I'll keep a listening ear to how they go after a few thousand kms.
    Cheers, Dale
    PIC - It comes with the Territory

    'The D3' - 2006 TDV6 HSE
    2008 Kimberley Kamper Sports RV
    Previously Enjoyed:
    2002 Adventure Offroad Campers 'Cape York'
    2000 D2 Td5 - plus!
    1997 Defender 110 Wagon - fully carpeted

  4. #6624
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,769
    Total Downloaded
    0

    What happened to your D3/D4 today?

    Clunk and Brakes

    All research on clunking that is not LCA related seems to be sway bar related (noticeable in rolling or uneven ground) so I opted to change them as cheapest and clunk appears to be gone.

    I think the reason is obvious though and probably common to most. I have a slight oil leak that accumulates on the bottom of the bellhousing and drips onto the sway bar. Just enough I wipe it off each oil service and barely enough to dirty the bash plate. I think it’s the vac pump from above.

    The oil in time turns the sway bar bush jelly like and they become soft. It was worse on the passenger side. I had replaced them already several years ago. I could simulate the clunk by prising on the sway bar with the wheel off. Pic is new one the old ones had swollen out the ends a noticeable amount.

    You can do the upper nut with a big offset 18mm ring spanner. Enough to do it up again pretty tight.

    IMG_6972.jpg

    After 160,000km the brake light came on so new Akebono pads were ordered.

    On disassembly the discs were in spec so got machined. Barely a lip.

    The pads except for one still had heaps of life. The rear caliper that the sensor sits on had a seized slide so had worn down that pad to the sensor limit. Pictures show the total thickness of entire plate and pad after 160k kms. The 8mm one set the sensor off.

    IMG_6971.jpg

    IMG_6969.jpg

  5. #6625
    Join Date
    Oct 2016
    Location
    Perth, AU
    Posts
    1,018
    Total Downloaded
    0
    Quote Originally Posted by PerthDisco View Post
    Clunk and Brakes

    All research on clunking that is not LCA related seems to be sway bar related (noticeable in rolling or uneven ground) so I opted to change them as cheapest and clunk appears to be gone.
    Which clunk is this - the 'driving over bumps' clunk, or the 'power on/off' clunk?
    2010 TDV6 3.0L Discovery 4 SE remapped to RRS output, Alaska White, GME XRS-330c, IIDTool BT, Dual Battery, Apple CarPlay, OEM Retrofitted: Cornering lights, Door card lights, Power + Heated Seats, Logic 7 audio

  6. #6626
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,769
    Total Downloaded
    0

    What happened to your D3/D4 today?

    Quote Originally Posted by veebs View Post
    Which clunk is this - the 'driving over bumps' clunk, or the 'power on/off' clunk?
    It was a clunk associated with cornering and uneven wheel articulation like backing off a curb. Slow speed stuff. Driving around the neighbourhood clunk clunk every corner. You could say that is power on / off.

    I did a sandy track with offset whoops and it clunked very hard.

    This is the time the sway bar is being asked to do its job.

    Nothing when braking or taking a speed bump directly on.

    For $20 or so a set a no brainer to change.

    Have now done a decent drive and absolute silence again.

Page 663 of 663 FirstFirst ... 163563613653661662663

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!