Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Infotainment hood for D4

  1. #1
    Join Date
    Feb 2017
    Location
    Perth
    Posts
    284

    Infotainment hood for D4

    Hi peeps - I recall reading / seeing something in a 3D printer infotainment screen hood that someone (used to) produce

    Anyone have any info on that? Keen to get the specs for my son so he can knock it up.

    Happy to buy if available..
    "TOY4DAD" is a 2016 TDV6 Corris Grey Black Pack, 5 x Compo's + 697's, APT bash plates everywhere, APT sliders, GOE rods, KINGS LED spots + lightbar, Rhino platform, Traxide DBMS, Hardwired ARB compressor, GME XRS-330 UHF, LED interior light conversion.

  2. #2
    Join Date
    Aug 2007
    Location
    Bunbury, WA
    Posts
    2,053
    Quote Originally Posted by BrianElloy View Post
    Hi peeps - I recall reading / seeing something in a 3D printer infotainment screen hood that someone (used to) produce

    Anyone have any info on that? Keen to get the specs for my son so he can knock it up.

    Happy to buy if available..
    Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.
    Chris


    2014 D4 TDV6
    1954 86" (I'll finish it one day.....)
    1980 Stage 1 v8

  3. #3
    Join Date
    Feb 2017
    Location
    Perth
    Posts
    284
    Quote Originally Posted by cjc_td5 View Post
    Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.
    Mate that would be awesome

    My son has a Prusa printer. Iíll PM you my email address
    "TOY4DAD" is a 2016 TDV6 Corris Grey Black Pack, 5 x Compo's + 697's, APT bash plates everywhere, APT sliders, GOE rods, KINGS LED spots + lightbar, Rhino platform, Traxide DBMS, Hardwired ARB compressor, GME XRS-330 UHF, LED interior light conversion.

  4. #4
    Join Date
    Aug 2017
    Location
    Vic Park, Perth
    Posts
    17
    Quote Originally Posted by cjc_td5 View Post
    Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.
    Would it be possibly to also grab the file, I've been searching through the threads seeing if anyone had it.

    Thanks
    Shane

    D4 SDV6 MY12 with Compo's & BFG KO2s the rest is bog stock!

  5. #5
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,545
    Quote Originally Posted by cjc_td5 View Post
    Yes that was me.
    I still have one Chris made for me 3 years ago and was only thinking the other day how good it is.

    Scott
    D4 TDV6 MY14 with Llams, 18" Wheels, Traxide DBS, Rhino Platform, APT sliders & protection plates, Prospeed Winch Mount with Carbon Winch, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread

    Ex '77 RRC 2 door. Long gone but not forgotten.

  6. #6
    Join Date
    Aug 2007
    Location
    Bunbury, WA
    Posts
    2,053
    I am happy to provide the STL file on the proviso that it is not used for commercial use or for profit. I am away from home until mid next week. Drop me a PM with an email address and I will deal with it when I get back.
    Cheers,
    Chris.
    Chris


    2014 D4 TDV6
    1954 86" (I'll finish it one day.....)
    1980 Stage 1 v8

  7. #7
    Join Date
    Oct 2014
    Location
    Brisbane West
    Posts
    213
    Iíd love a copy of this file

    Thanks
    James

    Quote Originally Posted by cjc_td5 View Post
    Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.
    MY11 SDV6 HSE, e-diff, LLAMS, Snorkel, Rhino Pioneer Rack, DBS, BFG KO2 265/65r18, Mitch Hitch, GME TX3550s, GOE stuff....

  8. #8
    Join Date
    Jun 2009
    Location
    Tangambalanga
    Posts
    7,552
    Quote Originally Posted by LRD414 View Post
    I still have one Chris made for me 3 years ago and was only thinking the other day how good it is.

    Scott

    X2,, awesome bit of work.
    I did nothing to mine, and it holds my little walrus Iíve been given by Digger Jnr.

  9. #9
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,033
    Quote Originally Posted by cjc_td5 View Post
    Yes that was me. My printer is not working at the moment. I'd be happy to provide the STL file if you have access to a printer.

    If perchance you are still in the market to supply, I'd be very interested in one. Pity the printer is out of action, cos I'll be down just after next weekend.
    D4 MY10 2.7 6 speed from Apr 19 with LLAMS, long range tank and other goodies - for towing "The Brick"
    MY95 RRC LSE Vogue Softdash "Bessie" from Aug 13 - with MY99 TD5 and 4HP24 transplant. Back home Aug 20 after being off road for periods totalling 3.5 years
    SADLY SOLD MY04 D2a TD5 auto Classic

  10. #10
    Join Date
    Aug 2007
    Location
    Bunbury, WA
    Posts
    2,053
    Quote Originally Posted by gavinwibrow View Post
    If perchance you are still in the market to supply, I'd be very interested in one. Pity the printer is out of action, cos I'll be down just after next weekend.
    My initial run a couple of years ago was done in ABS plastic that while easy to print with, is prone to warping during cooling. I had been experimenting with PETG which was being problematic such that the printer has been in purgatory for 6 months. Time for another crack at it, or go back to the ABS. I'll keep you posted.
    Chris


    2014 D4 TDV6
    1954 86" (I'll finish it one day.....)
    1980 Stage 1 v8

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!