Hey Josh,
Great job and thanks for the write up. I've a rack to organise with similar gear required so good to get some ideas.
Printable View
Hey Josh,
Great job and thanks for the write up. I've a rack to organise with similar gear required so good to get some ideas.
If you need any measurements etc just throw me a PM, im so happy now it's done. I procrastinate pretty heavily.Quote:
Originally Posted by Dagilmo
I got the wiring hidden yesterday. Jay car have a self wrapping wiring braid. Just cut to length and done. Part number WH5632.
I'll put a photo up when the app comes back to life.
Does it have a slit up the side or is it the open weave stuff (I can't check the P/N of the one I bought as I've thrown out the label). If the latter, cut it with a hot knife or it will unravel. Ask me how I know. [bigsad]Quote:
Originally Posted by josh.huber
Umm.. I'll take a photo in the morning. I was told to cut with hot knife. My soldering iron has a hot knife attachment. I've used it so much lately. But usually not at all.Quote:
Originally Posted by p38arover
This stuff has sealed seams but isn't like split tube where they meet in the middle. It keeps rolling up.
I re read my response and I don't think I explain it well. But I can't do any better. Lol take a photo!
Sorry for the delay. I cleaned the shed so well on Monday I lost the wrap. Here are the photos. This section was just cut with scissors. Didn't fly apart unless pulled at. The section I hot knifed was perfect though.Quote:
Originally Posted by josh.huber
First photo is normally how it looks
Second is with a laser light in it.
Third with a AA battery in it.
Fourth pulled apart.
If it sealed or shrank with heat it would be the ultimate wonder product
https://uploads.tapatalk-cdn.com/202...d560d924dc.jpghttps://uploads.tapatalk-cdn.com/202...d081e996d5.jpghttps://uploads.tapatalk-cdn.com/202...c3286b1268.jpghttps://uploads.tapatalk-cdn.com/202...3f4bfb2624.jpg