I havent done mine yet, but will be doing it once Im home from work next week.
First post guys. I recently purchased a D4 2009 TDV6. The centre console covering is torn so I purchased a leather replacement covering off EBay. It looks like it needs to be glued on. I was thinking about using shoe glue or liquid nails. Has anyone done this before ? Any tips?
Thanks Craig
I havent done mine yet, but will be doing it once Im home from work next week.
Shane
2005 D3 TDV6 loaded to the brim with 4 kids!
http://www.aulro.com/afvb/members-rides/220914-too-many-defender-write-ups-here-time-d3.html
Contact adhesive spray.
You can also get it in a tin. Having done mine recently, I'd probably go the tin over the spray fpr this particular job. It gives you a little more control when you just need a little bit.
Might just be me tho.
Thank guys. All good advice,I will ask the local bloke that fixes leather shoes about the adhesive.
Cheers
Re spray V paint. The spray will, imho, give a good even thin coat compared to painting it on by brush. My advice would be to spray the new covering not the console lid. No worries about mess that way.
Martin
Thats true and why I bought spray adhesive. I chose to spray the cover bit by bit rather than all at once and i found in some finicky bits even a short spray was too much adhesive, or the spray cone was too large and it went where i didnt want it to.
If you sprayed the whole cover at once it'd be fine but its very sticky and hard to adjust, especially if it sticks to itself!
Either way works though!
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks