D4 - a little bit of steering wheel wobble under brakes.

Quote:

---

Originally Posted by LRD4XXV

Hi DiscoJeffster

Understand that the HD version is stronger, would this make the ride feel stiffer compared with hydrabush?
Thanks

---

I’ve not noticed any difference

did you work this out i have this problem too (L320), have replaced LCA and now new tyres with alignment... ?

ive tried checking the discs for warp, seems good,

only 108k km on clock, thinking to try a shop.

I've got akebono ceremics pads, I find that they develop a shudder and need the brakes to be stood on aggressively to stop it.
The biggest shudder eliminator was the rear control Arm bushes on mine. Very different mileage but, mine had about 270k when I did it.

Quote:

---

Originally Posted by josh.huber

I've got akebono ceremics pads, I find that they develop a shudder and need the brakes to be stood on aggressively to stop it.
The biggest shudder eliminator was the rear control Arm bushes on mine. Very different mileage but, mine had about 270k when I did it.

---

Tried that too Josh after replacing all control arms, sway bar links, struts, bearings, wheel balance and full alignment. Only thing left was to skim the rotors, all better now.

rotors where high on my list too, (tried the hard braking bp too) i will focus on them next thanks

Quote:

---

Originally Posted by josh.huber

I've got akebono ceremics pads, I find that they develop a shudder and need the brakes to be stood on aggressively to stop it.
The biggest shudder eliminator was the rear control Arm bushes on mine. Very different mileage but, mine had about 270k when I did it.

---

Tried that too Josh, ended up skimming the rotors, all good now