1 Attachment(s)
Radion on Discovery 4 2011 model.
Quote:
Originally Posted by
DiscoJeffster
Great. That’s what I have - 2010 HSE. I’m in WA so I’d need to tackle it DIY but I’m ok with electronics. I’ll PM you.
I have just done my disco 4 with the basic display. The issue is that the 2010/2011 models appear to have a few parts borrowed from earlier Range Rover models, well I think that is what they have done. Also, I have a factory fitted amp, it is located under driver side seat, the base model isn't suppose to have an amp or have Harman Kardhan speakers. hence my feeling they have used a few bits from other models.
I have lost steering wheel controls, but I have found that it doesn't matter really. I bought the Aerpro FP8409 Facia kit and the CALOR05 harness. The harness is the thing that doesn't work, even though the website says it for that model. I know it is possible to get it going with a lot of work, but I returned it to Repco. The harness connection from the disco to the bought harness is a totally different size and shape. But as I mentioned I don't need steering controls. The fascia installs well enough and you have to cut off the crossbar when you do the install, you will know what i mean when you see it. The one thing that was annoying, all the speaker wires in the harness were green for positive and green/white for negative, so i have to mess around with identifying which speaker was which. Luckily someone had already installed an accessory, so I had and accessory positive wire that I could connect to, saved me trying to find one.
The Android Auto works flawlessly, I also am able to use Waze or Maps for Satnav, i installed the mic for the phone usage and "ask google" and I am currently installing the reverse camera. the stereo unit also has 2 USB outlets, with cables supplied, these accept mobiles or usb sticks and can also be used for charging. I pushed them through the side near the top glove box, drilled a small hole to get them through.
I am really happy with the sound and the sub works a treat and that sits just at the rear of the base of the drivers seat, though I might mount it near the rear window in the future. Below are the stereo details, there is a current online auction going. i got the stereo for just over $500 and the sub for about $180,but they are an auction so prices are only what I won them for and I have seen a few of them in recent months. The facia from memory was around $180. The wiring harness that doesn't fit was $385, both from Repco.
I bought a Kenwood DDX9019DABS and a Kenwood KSC-PSW8 Powered Subwoofer from a previous auction, they are doing one currently. at this link: Buy car-audio-01 Online - GraysOnline Australia