Android Screen for D3/RRS - reverse camera, CarPlay, etc...

Quote:

---

Originally Posted by Parso

I have the Harman Kardon amp, does that mean I need the super expensive Aerpro harness (CHLR9C) if I want the steering wheel controls?.

---

The Xonrich screen already handles the steering wheel controls via CANbus, you don't need any additional adaptors, and it makes no difference if you have the base audio, Harman Kardon or Logic7.

If you don't have the steering wheel controls you can just fit them to the wheel, they will just work.

Quote:

---

Originally Posted by Cambo@oldjaguar

The Xonrich screen already handles the steering wheel controls via CANbus, you don't need any additional adaptors, and it makes no difference if you have the base audio, Harman Kardon or Logic7.

If you don't have the steering wheel controls you can just fit them to the wheel, they will just work.

---

Awesome! I did read it supported CANbus. I just didn't believe it [emoji14]

Quote:

---

Originally Posted by Tombie

Spoken with Connects2U and Aerpro this week.
They are working on a module for the 2010/11 D4s with poverty screen.

In the meantime we have a workaround and I’ll be progressing that next month.

---

Hey Tombie - was this a workaround for the clock input you were looking into or something different?

My head unit arrived this afternoon after only 13 days! There are two big clips I'm not quite sure about but will cross that bridge when I come to it. Just need to find the time to put it in!

Quote:

---

Originally Posted by DiscoDB

Hey Tombie - was this a workaround for the clock input you were looking into or something different?

---

We’re trying to get the original settings screen and clock adjustment.

Went to town on the cubby today and ran the peripheral wires before running out of time. Just got to sort out power and whether or not I need to do some more wiring for the reversing camera and we're golden. https://uploads.tapatalk-cdn.com/202...0c91fa148f.jpghttps://uploads.tapatalk-cdn.com/202...159ca92941.jpg

Is there a guru WA based Android installer with Disco experience?

Quote:

---

Originally Posted by Parso

Went to town on the cubby today and ran the peripheral wires before running out of time. Just got to sort out power and whether or not I need to do some more wiring for the reversing camera and we're golden

---

The ACC power I took from one of the cigarette lighters at the bottom of the console, I think from memory the one on the right turns on/off with the ignition.

Surprisingly with the Xonrich screen the reverse gear detection is via CANbus, there was no need to connect a reverse trigger wire.

Quote:

---

Originally Posted by PerthDisco

Is there a guru WA based Android installer with Disco experience?

---

I don't know but if you find one, put him in touch with me!

For the reverse trigger, you can always add a mini fuse tap to fuse number 5 at the fuse box behind the glove box - this feeds the reverse lights.

For acc power tap either fuse 19, 34, or 47 - these feed the accessory power sockets. Pick one which is lightly loaded.

For permanent 12v supply, tap fuse 8 - trailer battery feed.

Note: this is for D3

Quote:

---

Originally Posted by PerthDisco

Is there a guru WA based Android installer with Disco experience?

---

Or Horsham Vic area ?