Page 1 of 7 123 ... LastLast
Results 1 to 10 of 62

Thread: Rhino Pioneer Tray Noise

  1. #1
    Join Date
    Jun 2009
    Location
    Perth
    Posts
    564
    Total Downloaded
    0

    Rhino Pioneer Tray Noise

    I have a full length Pioneer tray that makes a fair amount of wind noise, which is usually not a problem when going on trips but when travelling around town I could do without it.

    Because of the noise I take my tray off and store it in the garage roof but fitting it again is a pain so leaving it on would be great if I can get rid of the noise.

    Has anyone used one of these #43250 - Pioneer Wind Fairing - 1272mm / 50" | and are they worth it?
    Rod

    D4 MY16 5 seat TDV6 - LLAMS, Custom Drawers, OL Bar, Toyo Open Country, GOE Rims, Lithium DBS, eDiff, OA Long Range Tank, GAP Tool, Tracklander rack, Mitch Hitch, TPMS & Safari Snorkel

  2. #2
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,723
    Total Downloaded
    0
    Do you have the Backbone mounting system? I find the Pioneer platform is not very noisy, the only noise I hear is from the side rails. I read the Backbone is a major noise source.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  3. #3
    Join Date
    Apr 2010
    Location
    sydney
    Posts
    326
    Total Downloaded
    0
    I've got a backbone with a big platform. hardly any noise. Interestingly, I have a solar panel up there which is the full width of the platform. When mounted at the rear, there was lots of noise, but when I moved it to the front of the platform the wind noise went.

    Cheers
    Lucas
    2011 2.7 D4

  4. #4
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    4,089
    Total Downloaded
    0
    Quote Originally Posted by irondoc View Post
    I've got a backbone with a big platform. hardly any noise. Interestingly, I have a solar panel up there which is the full width of the platform. When mounted at the rear, there was lots of noise, but when I moved it to the front of the platform the wind noise went.

    Cheers
    Lucas
    2011 2.7 D4
    I have backbone and platform and it’s horrendously noisy compared to before.
    2010 TDV6 3.0L Discovery 4 HSE
    2007 Audi RS4 (B7)

  5. #5
    josh.huber Guest

    Rhino Pioneer Tray Noise

    I have the wind deflector but I havnt got round to fitting it due to my custom panel layout yet. Mine was noisy until I put my Tuffants with Cooper AT's on. Now the tyres are gone the rack doesnt bother me.

    A major contributor is our roof design. It funnels the air down the back which forces it to increase in speed. Lrd414 has a half rack which starts at the back right above the hump in the roof. So less wind channelled. The back bone has holes for that channelled wind to get out of and so does the rack between slats. The one Scott has just mounted on slats has more from for the air to get out.

    I too hate wind noise. My rack is noiser with my layout compared to rhinos, but I need it that way because of how I pack it. It's the same reason the previous poster says his rack is quieter with the panel at the front. The gaps in the rack without it allows the accelerating air to escape.

    My next experiment is to put contact film off my little girls books onto the holes in the backbone system to see if it stops turbulence.

    I have previously wrapped a 600t crawler Crane boom pendant system in 6mm Line to stop them flapping in the wind. The difference was incredible

    With this being my previous experience I reckon the wind deflector will work wonders on our D4's

  6. #6
    Join Date
    Dec 2009
    Location
    Baldivis WA
    Posts
    1,275
    Total Downloaded
    0
    I have the big (2128mm x 1426mm) Pioneer Platform with Backbone on my D4. I don’t notice any wind noise, I have more noise from the Maxxis AT980 tyres.
    2014, MY14 Discovery TDV6, Fuji White (2018-Now)
    2003, Discovery 2a, Td5 Manual, Zambezi Silver (2012-2018)
    2007, Adventure Offroad Campers, Grand Tourer (2015-Now)

  7. #7
    Join Date
    Jun 2009
    Location
    Perth
    Posts
    564
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    Do you have the Backbone mounting system? I find the Pioneer platform is not very noisy, the only noise I hear is from the side rails. I read the Backbone is a major noise source.

    Scott
    I have the full length rack with the 3 feet mounts along the roof, not a back bone system. I also have the 3 roof bars (I bought them before the platform) and if I mount the 3 bars with the front bar above the drivers seat, same problem, a lot of noise. So for me if there is anything above the driver's seat it makes noise, hence trying to find out the wind deflector's effectiveness.
    Rod

    D4 MY16 5 seat TDV6 - LLAMS, Custom Drawers, OL Bar, Toyo Open Country, GOE Rims, Lithium DBS, eDiff, OA Long Range Tank, GAP Tool, Tracklander rack, Mitch Hitch, TPMS & Safari Snorkel

  8. #8
    Join Date
    Jun 2016
    Location
    Carnegie, VIC
    Posts
    45
    Total Downloaded
    0
    I've also got the full length pioneer platform with the backbone mount. A workmate donated me some lengths of plastic uni-strut lid that clips neatly into the downward facing openings along the 5x cross beams. This definitely reduced rumble, but I've gotten used to the rest of the noise. I almost bought the deflector once I saw it, but held back due to lack of feedback. Watching with interest!

  9. #9
    p38arover's Avatar
    p38arover is online now Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,160
    Total Downloaded
    0
    I'd be interested to hear what you think of the deflector. Rhino stuff is so exxy that one doesn't want to spend the money unless one knows it works.

    I have a full length platform on my L322 (thanks irondoc) and noise isn't an issue if I keep the sunroof closed. Like rocket rod, I have feet and three roof bars.
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  10. #10
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    4,089
    Total Downloaded
    0
    I can’t fathom those who say the backbone and full length rack aren’t noisy? The difference was and still is incredible between fitted and not with the windows up. If there is a tailwind it’s bearable but holy crap when you have a good headwind, it’s awful. I’ve even got a full length spotlight that kind of acts as a wind deflector but that didn’t help.


    I think the only variation to others is that I have two crossbars/tracks mounted to the top of mine that I mount my roof box to. Maybe that causes some additional turbulence??
    2010 TDV6 3.0L Discovery 4 HSE
    2007 Audi RS4 (B7)

Page 1 of 7 123 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!