The installation of LLAMS & my Traxide system are the only two things where I have EVER come in under the suggested time that it should take - and both were by a significant margin too. Both have great sets of instructions and are a credit to the guys concerned. :thumbsup:Quote:
Originally Posted by BeeGee
Great feedback, thanks.Quote:
Originally Posted by Narangga
Bryan
Are you aware you can make a 2 into 1 plug set up and feed your Jayco from the existing vehicle wiring AND solve the trailer detection issues all at the same time?
This is what Tombie is saying https://www.aulro.com/afvb/attachmen...-201800203.pdf
Taken from this thread Trailer connection for Jayco 12 Pin plug
Thanks guys.Quote:
Originally Posted by kelvo
What are my best options for an aux battery tray?
I noticed this FrontRunner one
Land Rover Discovery LR4 Battery Bracket | Outback Equipment
or a Piranha one like this?
Battery Tray to Suit Land Rover Discovery IV Petrol V6, TD6 3.0Lt 4X4 4WD Offro | eBay
Traxide!Quote:
Originally Posted by BeeGee
I ordered the Traxide D4-5S kit off of Tim which should be on its way. I didn't really read the scope of the kit but just reviewed it and it does say it comes with battery brackets and hold down bolts.Quote:
Originally Posted by DiscoJeffster
Hi BeeGee, on Friday, someone from WA ordered one of my D4 kits which comes with a stainless steel D4 specific battery tray.
I may have wrongly assumed the order was from you.
If the was from you. As above, you do not need to source a battery tray, it is included in the kit.
If it was not your order, please ignore this post.
Hi again BeeGee and you just beat me to the post.
All is good, I just didn’t want you spending money that you did not need to.
Again, all is now good.