Rear Valve Block leak

Quote:

---

Originally Posted by Parso

Poor thing was caked in mud. Guess it was overheating! https://uploads.tapatalk-cdn.com/202...c0ab92aee7.jpghttps://uploads.tapatalk-cdn.com/202...6137fc1376.jpg

---

Drill a 20-25mm hole in the plastic at the lowest point, helps in draining out any mud and sand.

Quote:

---

Originally Posted by Eric SDV6SE

Drill a 20-25mm hole in the plastic at the lowest point, helps in draining out any mud and sand.

---

Good thinking! I love it!
Sadly I celebrated too soon and the suspension Fault came back on after I left the back yard [emoji24]

Slow raising is usually the compressor dessicant disintergrating and blockingthe filters. Get the X8R dryer rebuild kit and service the entire compressor would be what I'd do.

Quote:

---

Originally Posted by Eric SDV6SE

Slow raising is usually the compressor dessicant disintergrating and blockingthe filters. Get the X8R dryer rebuild kit and service the entire compressor would be what I'd do.

---

That's the plan. I just need the fault codes read to confirm first. Torn between paying the local mechanic to read, purchasing a cheaper one that can read the suspension or saving for a gap iid.

Quote:

---

Originally Posted by Parso

That's the plan. I just need the fault codes read to confirm first. Torn between paying the local mechanic to read, purchasing a cheaper one that can read the suspension or saving for a gap iid.

---

If you are going to keep the car for a while, cant beat the Gap tool.