Suspension fault

Quote:

---

Originally Posted by rdenyer

Similar to symptoms that I have, with my 2005 Discovery 3

Code I get with the IID tool is "Ride level control module C1A13-64 Pressure does not decrease when venting gallery"

This seems to indicate that the desiccant canister is blocked, desiccant has done it job and turned to dust and blocks filters and possibly value blocks

Here is my thread
Ride level control module C1A13-64 Pressure does not decrease when venting gallery

---

Put a full 4x4 Air Seals kit through it. So cheap and easy and satisfying and makes new again. Then do the air blocks one by one as desiccant dust travels through the system.

The unit is not destroyed by corrosion in Australia so comes apart nicely.

There’s recent posts on that.

Got a full oring set and desiccant and filters for the amk compressor.

Quote:

---

Originally Posted by 460cixy

Got a full oring set and desiccant and filters for the amk compressor.

---

Where from? That's good to know.

Scott

4x4 AirSeals

Air Suspension Repair Kit and Parts for Land Rover, Range Rover, 4x4 Air Seals - mail order available

UK based

Very helpful and some helpful online videos