Page 11 of 19 FirstFirst ... 910111213 ... LastLast
Results 101 to 110 of 182

Thread: 3.0 TDV6 broken crankshaft / engine rebuild

  1. #101
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    890
    Total Downloaded
    0
    On the topic of tdv8 Why do 2.7 cranks break?
    "Also for anyone wondering, here is TDV6 vs TDV8 crank for comparison, much thicker !"

  2. #102
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    890
    Total Downloaded
    0
    Also , maybe just put a bmw or ranger engine in....

  3. #103
    Join Date
    Sep 2022
    Location
    Sydney
    Posts
    58
    Total Downloaded
    0
    Quote Originally Posted by RHS58 View Post
    It’s been 3 weeks since the last post on this topic.
    How goes the rebuild, Fabsky?


    Hi everyone,
    I haven't posted in a while because there was nothing to talk about.
    Generally, I did not sleep and worked on the project such as searching for parts and ordering them, work related to cleaning engine components that will not be replaced, etc..
    As a result, several packages from Europe, USA and AU have arrived, and there are quite a few.
    Now to the point..
    The engine block went to the machine shop for a treatment (details will be revealed as soon as I receive the block from the workshop), in addition, I decided that I will also entrust the heads to professionals for comprehensive service (checking the plane / possible machining, checking the valve faces and valve guides, replacing valve stem seals etc. In addition, the connecting rods were also inspected for the fault that affected the engine.
    I am full of hope that this week I will be able to collect everything from the workshop. I also gave all the injectors on the machine for testing. The turbochargers showed very little play on the rotor, so they were only well cleaned.


    IMG-9738.jpg IMG-9433.jpg IMG-9452.jpg IMG-9455.jpg IMG-0333.jpg IMG-0392.jpg IMG-0736.jpg



  4. #104
    Join Date
    Jul 2019
    Location
    Sydney
    Posts
    153
    Total Downloaded
    0
    Hi Fabian
    thanks for the update.
    Wow Wee!!! Excellent commitment to this rebuild.
    so impressive. looking forward to learning more as you progress and succeed.
    thank you once again.
    best wishes
    Jeff.
    '98 Disco 1 V8 (Gone) Young family; so much fun...
    '00 Disco 2 V8 (Gone) Mrs Jeffoir's...
    '02 Disco 2 V8 (Gone) What a lovely exhaust note...
    '07 Disco 3 HSE TDV6 400,000km. Still going strong...
    '13 Disco 4 HSE SDV6 Great days lie ahead Comrades....

  5. #105
    Join Date
    Jan 2019
    Location
    Melbourne
    Posts
    20
    Total Downloaded
    0
    Quote Originally Posted by Fabsky View Post
    Hi everyone,
    ...The engine block went to the machine shop for a treatment (details will be revealed as soon as I receive the block from the workshop), in addition, I decided that I will also entrust the heads to professionals for comprehensive service (checking the plane / possible machining, checking the valve faces and valve guides, replacing valve stem seals etc. In addition, the connecting rods were also inspected for the fault that affected the engine...
    Fabian, this is great news, happy to hear its progressing well.

    I'm really interested in hearing what was done to the short block and who did it.

    So once you have everything back you will assemble the short block, heads and ancillaries yourself?
    2010 LR4 TDV6 : 265/60/18 K02s : Traxide DBS :

  6. #106
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0
    Quote Originally Posted by Fabsky View Post
    In addition, the connecting rods were also inspected for the fault that affected the engine.
    Are you re-using the conrods from the front 2 cylinders after that section of the crankshaft was unsupported at 1 end? The pistons could also have been damaged.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  7. #107
    Join Date
    Sep 2022
    Location
    Sydney
    Posts
    58
    Total Downloaded
    0
    Hi everyone ☺️

    The stuff is already in the Fabsky’s garage 🪚🪓🪜⚖️🧯 Tomorrow we're going to wash and measure 😎

    853FCDD3-BA1E-4086-B6C9-2EF9942B3F54.jpg69D9A032-E31B-4A04-A751-6612BD815394.jpg0927821B-2D70-4CBB-B311-582F05F11D9E.jpg91D692F4-DE0C-4F94-9391-872839DCB1DF.jpg

  8. #108
    Join Date
    Sep 2022
    Location
    Sydney
    Posts
    58
    Total Downloaded
    0
    Quote Originally Posted by Deeb0 View Post
    Fabian, this is great news, happy to hear its progressing well.
    Quote Originally Posted by Deeb0 View Post

    I'm really interested in hearing what was done to the short block and who did it.

    So once you have everything back you will assemble the short block, heads and ancillaries yourself?



    That's right, I leave only machining to trusted and proven specialists. All the rest in my hands .. with the rest as always ☺️

    3A08501F-B1C7-4B3F-AD7C-D1E7F0E72743.jpg

  9. #109
    Join Date
    Sep 2022
    Location
    Sydney
    Posts
    58
    Total Downloaded
    0
    After a short break, I'm back to the project. And that's it in short..☺️


  10. #110
    BradC is offline Super Moderator
    No one of consequence
    Supporter
    Join Date
    Mar 2018
    Location
    Perth (near Malaga)
    Posts
    2,862
    Total Downloaded
    0
    Did you measure the bearing clearances?
    MY08 D3 - The Antichrist - "Permagrimace". Turn the key and play the "will it get me home again" lottery.

Page 11 of 19 FirstFirst ... 910111213 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!