I hope it's not aircon, but more of a fan speed controller problem as my fan seems to run very slow no matter how much the fan knob is twiddled, and then eventually gets going at a decent speed. The air is cold out of the grilles just doesn't have the flow. Does anyone know if the fan speeds work off a good old resistor bank or just different resistor values telling the CANBUS which speed to use as mine must be about ten speeds, not like the old 3 or 4 speed units with resistors. Could also be the fan/bearing is seizing.
Last edited by RANDLOVER; 21st January 2024 at 09:52 PM. Reason: Expansion
2005 D3 TDV6 Present
1999 D2 TD5 Gone
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks