
Originally Posted by
eckolsim
Just an update after my service.
Extracted (suction method) about 3.5 Ltrs. Did this a number of times over an hour or so to get everything.
Put a litre of fresh oil in for a flush and got even more back? Didn't measure what I put in but felt like I got more back.
Pulled the sump plug and got nothing.
Topped up with 5.9 Litres and showed just under top of full scale.
Conclusion:
- The extraction pump method gets it all
- I am consuming oil. Was about 15,000 ks since last service (not ideal I agree) and mainly city driving.
Have been running 5W-40 Penrite. Do I need to be concerned with this consumption?
Personally I wouldn’t be concerned with the consumption but I would be very concerned that I had failed to check the levels every now and then and that I had let it get so low and it had been running low for who knows how long
just check your oil levels every 1000 to 1500km and top up as required
Discovery 1 4.6, true trac front and rear, superior engineering arms,old tourer now bush toy
Discovery 4 3.0 HSE MY13 ECB Bull bar, winch, spot lights, aux fuel tank, Kaymar rear bar, duel wheel carriers, 18 tuff ant wheels 265/65/18 BFG KO2's for play
Bookmarks