Printable View
Def90,
No, I had already fitted a Kaymar rear bar and wheel carrier as I just about ripped the OEM bumper off when the mud flap caught on a rock doing a creek crossing. I would think that it would be a pretty tight fit from what I have read on other threads/forums.
Hi all as in my introductions post just fitted the LTZs last week - all great so far, The big test will be Birdsville trip end of July from the Gold Coast towing the off road camper. Will be fully loaded and carrying 2 big 18yr olds as well. See attached photos in http://www.aulro.com/afvb/introducti...ps-please.html
Cheers
Rob
You'll need a 'Mitch Hitch' for that thrip then. :D
Rob4play,
I agree with CaverD3, fit the Mitchell Bros hitch. If nothing else you wont have the OEM hitch dangling down below the rear bumper just waiting for an unsuspecting rock to clout.
Good luck with the trip. Will be interested in seeing how the LTZs go across that country. Am thinking about a trip from Perth to Bris next year via the centre. Last time I did that country I was running Cooper STs on a LC.
Cheers
Hi Goys - thanks for the input and I guess you mean one of these - see pic. Nearly did not trade the 2004 D2 TD5 till I found these were available as could not see how I could tow the off road camper trailor with the OEM fit. First mod that went on never even tried fitting the original.
Has anyone tried the Mitchell - off air solution, pretty expensive but technically great solution as long as it does not interfere with warranty I guess?
Cheers
Rob
flat rob, or only way it would fit ?
Like any aftermarket mod the air lift kit could affect warranty if they can prove it was the cause of the failure. The kit is designed so the actuators are removable via 'quick fit' connectors in the event of any suspension issues.
The kit also gives an air outlet off the tank for pumping up the tyres, which can be removed if there isa suspension issue but needs to ne unscrewed.
All the reports and posts state cannot fit the spare unless deflated so I was perepared for that. As it took approx 2.5 hours for fitting, balancing of all wheels then wheel alignment and it was going to be a tight and fiddly fit I suggested to the Tyre Dealer we deflate totally. This weekend I aim to drop it and experiment with how much air it can take and still fit. Not ready for a rear wheel carrier at this stage.Quote:
Originally Posted by gps-au
Just means I need to carry the air compressor all the time. For this trip I will most likely bung in the trailor or modify the trailer to mount opposite the trailor spare see pic - D2 was pretty new then no bullbar.
Thanks Caver - found out today one of the other guys going on the trip has ordered the Mitch off air kit. I had disconted as it showed as $1280 now $330. Must have had an error on their web site and I should have rung up. Might have to sell the ARB to my son who has the D2V8 later on and go for the Mitch. Did not see any mention of the lift kit though. Have seen plenty of posts on that and not a bad idea for me with the LTZs and the trailor. Do you run it?Quote:
Originally Posted by CaverD3
Cheers
Rob
See this months Overlander, page 16 ;)
The kit for $330 I think would be the kit just for air off the tank.