How to install an IC-440 in a D3

Quote:

---

Originally Posted by Ashes

..........Does unplugging the handset with this unit power it down?

---

No, tried that this morning.

I haven’t taken that panel out so it was a bit hard to tell how strong it was. On the other hand, I’m guessing the radio probably isn’t that heavy and if it’s not in the mounting bracket you might get away with it if its weight is distributed and it is secured Anyways, might let someone else try it first. Your mounting position is certainly much more secure.

Pity about removing the headset not powering down the unit, would have been a great option for part time/weekend users. I assume though that if you don’t turn the handset on via the switch the unit stays powered off anyway so probably not a problem anyway.

If I put a radio in, it will be a stealth install to please SWMBO so either a handheld or a handset/remote unit are my options. Will need to do a bit of research on aerial options though.

We love our D3 after the first 6 weeks and are looking to do a few more family trips in it and some basic/easy 4WD. I can see that we will get some use out of a UHF, would also probably get use out of a 2nd battery and fuse box to run a fridge and various kid electrics..

The panel we are talking is fixed by 2 small screws at the front and by 3 plastic fingers at the back, that slot into the insulation of the fire wall. It'd cause hell if it drop out on your feet!:D

Good posts guys and give me some ideas for my own install. Hi Mal_W, could you please post a photo of how you did your antenna mount.

I don't have any bar work and am looking at ways of mounting the antenna. The shape of the bonnet won't allow a regular z-mount to work.

Thanks

Bob Z

Quote:

---

Originally Posted by WhiteD3

Thanks Garry, but from the driver's seat it'd be upsidedown?

---

Ah well mine is a GME and I suppose it is upside down, thats when my boy doesnt have it in his hand speaking to his little cousin.

But in saying that is a set and forget for me, I switch it on when I leave and switch it off when I return, mine is connected to the Aux battery so I can leave it on when the car is parked and not worry about the starting battery.

As for the shelf that was mentioned, not so strong, I would be wary about mounting anything there IMO

G

Quote:

---

Originally Posted by Garry

As for the shelf that was mentioned, not so strong, I would be wary about mounting anything there IMO

---

If you need electrical for anything ON (being stuck ON) the windscreen, its a handy place to put some dual 12vdc recepticals on the top side.

[. Hi Mal_W, could you please post a photo of how you did your antenna mount.

I don't have a photo, but go to benelec.com.au, click on search, and enter part no. 027303, which is for Adjustable Tilt Lip Mount, and you will see how it can work. The underside of the mount that contacts the paintwork on the car has a protective rubber pad, and it tightens up underneath with two screws onto a thin plate. I paid $25 for the mount. The antenna is of course extra.

Mal_W

Thanks Mal_W

Looks like it could work

Cheers

Bob

Any chance of getting these pictures back? :D

Sorry, no. The D3 is long gone as are the pics.