Can discovery 4 tail light fit on a discovery 3

Quote:

---

Originally Posted by AndrewM

I'm up for that too. And while I have the gearbox out I am going to swap my 2.7L for a new 3L donk. Tighten it all back up with wingnuts and loctite and away we go! Hippy

---

Loctite on the wingnuts hey? You are confident that it will never have to come out again!

next time he refills the washer resevoir he will!!!

Ray.

Quote:

---

Originally Posted by Rayngie

Scott, you say it's a straight swap....but being a landrover design, you can bet it involves a gearbox comming out and tyre rotation just to get at the screws to take the old ones out!

Ray,

---

There is a video of how to do put D4 tail-lights onto a D3 on Utube. It is very simple.

You can do it without removing the gearbox if you have the right gear.

Google Land Rover "Body-off". :p

[ame="https://www.youtube.com/watch?v=LvYqshcjsEc"]https://www.youtube.com/watch?v=LvYqshcjsEc[/ame]

I did mine a few months ago, I got VALEO tail light clusters and 2x 50W 8 R ohm Car Turn Indication Signal Rear LED Bulb Load Resistors.

Total cost approx $615 plus $10 for the resistors.

Ryall

I bought all parts from Australian suppliers, the tail lights were from NSW and the resistors were from VIC, do a search for EBay part no = 251537060910 for the resistors and the light clusters were from Karcraft, cost were $615 inc delivery for two clusters.

Ryall