Results 1 to 4 of 4

Thread: Height calibration

  1. #1
    Join Date
    Aug 2015
    Location
    WA
    Posts
    69
    Total Downloaded
    0

    Height calibration

    Was doing the calibration with my nanocom black box and the nanocom decided to stop working.
    Anyone in Perth NOR that can help out? The suspension warning light is on and one side is 30mm higher than the other.
    Cheers
    2007 RRS TDV8

  2. #2
    Join Date
    Aug 2015
    Location
    WA
    Posts
    69
    Total Downloaded
    0
    Nanocom all sorted thx to the "Help Desk", Rangie all level again....

  3. #3
    Join Date
    Feb 2017
    Location
    Melbourne
    Posts
    56
    Total Downloaded
    0
    Hi Sandgroper,

    Was your RR riding a bit rough? Do you think calibration will help the ride quality?
    I've changed out my struts and compressor for new ones....and I not sure whether I need to calibrate. I've done 30,00 since the swap. It rides pretty good on the 19's but I feel like it's a bit slappy over bumps around town.
    Cheers
    Jeremy

  4. #4
    Join Date
    Aug 2015
    Location
    WA
    Posts
    69
    Total Downloaded
    0
    Quote Originally Posted by Towcar View Post
    Hi Sandgroper,

    Was your RR riding a bit rough? Do you think calibration will help the ride quality?
    I've changed out my struts and compressor for new ones....and I not sure whether I need to calibrate. I've done 30,00 since the swap. It rides pretty good on the 19's but I feel like it's a bit slappy over bumps around town.
    Cheers
    Jeremy
    I think the calibration is just for height alone, does nothing for ride quality.
    I changed out 1 front strut because it was leaking, now the opposite one is doing same so of to buy another one on Monday.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!