7 pin trailer connector not working HELP

I replied to your specific thread.

Quote:

---

Originally Posted by Australiandad

I have the same problem with my 2010 and cant for the life of me locate the trailer brake fuse have you managed to locate the fuse?

---

I ended up locating the fuses behind the panel in the boot area on the passenger side. The standard place is under the floor near the tool and jack area. You will see the cut out on the rear part of the foam insert. (Near your left leg when you lift the cover)

Quote:

---

Originally Posted by mtb_gary

I ended up locating the fuses behind the panel in the boot area on the passenger side. The standard place is under the floor near the tool and jack area. You will see the cut out on the rear part of the foam insert. (Near your left leg when you lift the cover)

---

Thanks Gary but I think the 2010 to 2012 might be a bit different, I’m not even sure the brake lights have a fuse the wiring diagram indicates that it come straight from the BCM all other wires are fused behind the glove box.

yes my 2010 has none in the boot