Printable View
Bonnet and door just clear nicely, the snorkel used is a cheapie to suit D3 & D4,s. Quite a bit of work to fit, you need to remove front guard to make mods to panels underneath etc. If you want to do this, PM me your email as I have a "how to" with pics in MS word format, and I will send to you.
Peter
Sorry, forgot to answer Q on wading/dust. My reason was primarily dust, however may help wading as duct is sealed to snorkel, subject to "management" of connection to filter housing and "drain" holes under housing.
Peter
For Disco Gazza
to 33chinacars,
Looks like a nice tight fit there.:D
I'll do the same for my beast over the next cupla weekends.
cheers
Yes very tight. Lights just in front of bar.
Hey DiscoGazza have you fitted your FYRLYTs yet ? I am thinking of doing the same on my L322 but was worried about the space. After speaking to FYRLYT direct they thought that I could bolt direct to the bar using an M8 bolt that fits just one of the studs in the bar using an appropriate washer 33chinacars idea looks neat though.
Also can either or both of you tell me how the FYRLYTs perform on your L322s and what wiring kit you used.
Thanks
Julian
Very happy with mine. Had an auto elecy wire mine in.
I am very happy with my Fyrlyts (although I now have a set of Nemesis to fit, too much light is barely enough! :twisted:).Quote:
Originally Posted by JulesD
I installed and wired them myself. It is all pretty easy, just use thick enough wire. I also chose to use one relay per light to make sure there were no voltage drop issues.
Epsom Green is the colour.
Although metallic, it's almost BRG but not quite. REAL BRG ( ex Jag, etc) is just a shade lighter.
Now that I know of 2 others same colour as mine , getting too common! I work out around Chinchilla and the only other EG one I've seen in flesh is IN same area!
Might have to change?
No way!
To JulesD,
Havent fitted mine yet,been slack.
Might get it done for xmas.
cheers