-
30th May 2017, 07:37 AM
#1
PArking Sensors
My parking sensors seem to have stopped working.
When I select reverse there's an initial beep and the light on dashboard switch flashes 6 times, but neither the front of the rear then work when I'm manoeuvring.
Any ideas?
Car is a 2010 MY 10 3.6 TDV8
-
30th May 2017, 08:18 AM
#2
Had the exact same issue. Let me see if I can find my post which explains the problem
-
30th May 2017, 08:24 AM
#3
-
30th May 2017, 03:36 PM
#4
Many Thanks Blade - having read your thread, I have similar side gremlins to you in the coolant level being reported as an error*; and a couple of suspension errors. I'll focus first on trying to see if I have a faulty sensor as root cause.
From my RRSport days this I found to be a drawback of the Canbus system in that you would get multiple errors around the real error.
*the coolant error was quoted at $800 by Brighton Land Rover as a coolant leak, hasn't really been an issue since clearing!
-
31st May 2017, 07:38 AM
#5
The three issues my car had when I first got it was the following:
- Battery measured ok but needed replacing. This fixed most random errors and issues.
- one rear parking sensor and the little CPU that controls the brake sensors were faulty.
- my wiring loom going to the back of the car was crushed by a piece of trim which caused random suspension lowering to the cars belly.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks