Hi Laurie, just seen this post after posting something very similar in the RRS forum. Silicon is the go then..... cheers Marty
Island 4x4 in the UK are selling a 6 silicone hose kit for L322's equipped with the 3.6 TdV8 for A$118.94. Plus postage ! Tnis is about A$50 better than most I've seen advertised.
Silicone Hose Kit (Britpart) Range Rover L322 TdV8 - DA4580 Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order.
Laurie
2010 TdV8 Autobiography, D2 Td5, RRC 4 Door VM/300Tdi, RRC 2 Door V8
Hi Laurie, just seen this post after posting something very similar in the RRS forum. Silicon is the go then..... cheers Marty
Marty
Silicon hoses last longer and remain flexible: the mistake many make is to use the. original hose clamps instead of the proper silicon hose clamps.
Laurie
2010 TdV8 Autobiography, D2 Td5, RRC 4 Door VM/300Tdi, RRC 2 Door V8
Pics of these Laurie?
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
Pedro
All the good quality clamps are stainless steel and wider than stock clamps as they operate with more clamping pressure ! Below are the popular T-bolt clamp and the Gates worm drive version, Ebay is your friend here as good quality clamps can be brought for 50% to 75% cheaper than Repco or Supercheap.
Laurie6849_1.jpg3%20Silicone%20Hose%20Clamps1_FRO_A.jpg
I bought that kit, or at least one with the same part number.
Big hoses are fine, short hoses don't fit anywhere and it is missing the two 90 degree hoses.
I've had silicone hoses for a few years now. For the 90 degrees I purchased hoses from a after market performance shop that had same I.d. With the 90 degree bend and cut them to fit.
so far so good
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks