Additional Switches

I am now thinking about that new ARB controller - Linx I think its called, not seen it in the flesh just the internet advertising.

Quote:

---

Originally Posted by Graeme

Attachment 130630 Attachment 130629

There's room for 4 rocker switches.

Having bi-xenons, I fitted cheap 55W 5000K HIDs to the high-beam fill-ins with the globe tabs bent forwards at about 45 deg to raise the beam which otherwise would be too low.

---

Graeme, I'd like to use same rocker switches in this location - suspect only a few will have such a low profile to enable the roller slide cover to close and hide the switches. Can you tell me what brand they are? cheers

Jaycar sell one of the several available in the shape. SPST Round Rocker Switch | Jaycar Electronics
I found the same range on ebay with various different options - I have 1 centre off with on with either directions marked for my camera switch and a simple on-off unmarked one for my tracker radio. I chose the round ones because the hole is easy to drill using a step drill and they sit low to allow the cover to close.

Perfect thanks Graeme!

Don't be alarmed when drilling the hole to find another partial layer just below that also gets drilled.

ahhh many thanks!!