Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: Same Rotors and Callipers?

  1. #1
    Join Date
    Jun 2008
    Posts
    168
    Total Downloaded
    0

    Same Rotors and Callipers?

    Are the L322 3.6 TDV8 rotors and Callipers the same as fitted to the 3.0 TDV6 RR Sport / D4?

    (the reason I ask is that the Compomotive 18" wheels fit both these)

  2. #2
    Join Date
    Jun 2009
    Location
    Queensland
    Posts
    1,043
    Total Downloaded
    0
    Quote Originally Posted by 2nd Rower View Post
    Are the L322 3.6 TDV8 rotors and Callipers the same as fitted to the 3.0 TDV6 RR Sport / D4?

    (the reason I ask is that the Compomotive 18" wheels fit both these)
    I'm not certain BUT I have seen Compomotives on a 2009 TDV8 (Member here); Assume they will fit your 2010 too. I'd consider "Tuff Ants" 18inch steel wheels now - new to market and MUCH cheaper. Developed in BNE by a D4 owner and just into production. Fit ALL D5 too.

    cheers
    L405, Vogue SE, 4.4SDV8, 8 speed, Rear e-diff

  3. #3
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0
    The MY10 L322 3.6 and MY11-12 5.0 NA front calipers are the same as fitted to the MY10 3.0 D4 & RRS and the discs only differ in the position of the hole for the retaining screw. The MY07-09 L322 3.6 calipers are 4-pot Brembos.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  4. #4
    Join Date
    Jun 2008
    Posts
    168
    Total Downloaded
    0
    Quote Originally Posted by Graeme View Post
    The MY10 L322 3.6 and MY11-12 5.0 NA front calipers are the same as fitted to the MY10 3.0 D4 & RRS and the discs only differ in the position of the hole for the retaining screw.
    Thanks Graeme, I'm not technical on this matter, but do you know if the offsets be the same, therefore a wheel that fits the 3.0 D4 and RRS would then fit my MY10 TDV8 that has the same caliper?

    I'm looking to see whether the steel Tuffants would fit, and I read elsewhere here on Aulro that although they fit the 3.0 D4/RRS the first design for tuffants don't fit an MY08 L320 RRS TDV8 or D5 due to what i interpreted as 'offset issues'.

  5. #5
    Join Date
    Jan 2019
    Location
    Brisbane
    Posts
    8
    Total Downloaded
    0
    Quote Originally Posted by 2nd Rower View Post
    Are the L322 3.6 TDV8 rotors and Callipers the same as fitted to the 3.0 TDV6 RR Sport / D4?

    (the reason I ask is that the Compomotive 18" wheels fit both these)
    Alrighty, just checking out the front at this stage and I came up with a different result than Graeme?

    This could be simply a part number difference but exactly the same pad. I would check but I physically don't stock a set of the L322 pads/discs.

    The RRS and D4 have the same setup when it comes to the front pads/discs however the L322 TDV8 is different.

    Brembos suit both the L320 and L322 V8s.


    2010> L322
    • 3.6 TDV8
      • 21(STD Pads)
      • 43(STD Discs)

    • 5.0 SCV8
      • 86 (Brembo Pads)
      • 76 (Brembo Discs)


    2010> RRS
    • 3.0 TDV6
      • 26 (STD Pads)
      • 24 (STD Discs)

    • 5.0 SCV8 & 4.4 TDV8
      • 86 (Brembo Pads)
      • 76 (Brembo Discs)


    2010> D4
    • 3.0 TDV6
      • 26 (STD Pads)
      • 24 (STD Discs)


    I don't know if this helps or hinders, but if you need specifics feel free to PM me your VIN and I'll see what cross references I can come up with.

  6. #6
    Join Date
    Mar 2011
    Location
    Balbarrup WA
    Posts
    571
    Total Downloaded
    0

    What alternative size wheels for L322 TDV8

    Looking at a L322 Vogue TDV8 3.6 fitted with 20" rims and 4 piston Brembo calipers.
    Can anybody advise what 18" rims might fit over those calipers as I will need to put some higher profile tyres on the vehicle, than 20" will allow, so looking to fit 18" if it can be done.

    Last edited by vbrab; 3rd September 2020 at 03:01 PM. Reason: bit more detail

  7. #7
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0
    The 3.6 will allow Compomotives and possibly some others too.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  8. #8
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,779
    Total Downloaded
    0
    Quote Originally Posted by vbrab View Post
    Looking at a L322 Vogue TDV8 3.6 fitted with 20" rims and 4 piston Brembo calipers.
    Can anybody advise what 18" rims might fit over those calipers as I will need to put some higher profile tyres on the vehicle, than 20" will allow, so looking to fit 18" if it can be done.

    I have 18” Compomtive rims on my 2008 L322 tdv8 3.6 with Brembo brakes.

    Probably not relevant to your car but I understand the 2010 3.6 L322 had brakes like the D4 (not Brembo brand), so 18” Compos should fit this model too.

    My FFRR.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  9. #9
    Join Date
    Mar 2011
    Location
    Balbarrup WA
    Posts
    571
    Total Downloaded
    0

    RE: alternative 18" wheels for L322

    Quote Originally Posted by rar110 View Post
    I have 18” Compomtive rims on my 2008 L322 tdv8 3.6 with Brembo brakes.

    Probably not relevant to your car but I understand the 2010 3.6 L322 had brakes like the D4 (not Brembo brand), so 18” Compos should fit this model too.

    My FFRR.
    Thanks very much rar110, I now have a couple of options. (And the wheels look very nice.)
    1. Just buy 6 Compomotive 18" rims and leave the Brembo calipers on.
    2. Put D4 calipers on the rear and then I can fit D4 18" rims.
    There will be a solution in there somewhere.
    Thanks muchly.

  10. #10
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0
    LR 18" rims fit the rear of all L322s with the original calipers.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!