Thread: DAB+ Digital Radio for 2005-2009 L322

The above pics are of my L322. The digital sound is very very nice and now my first choice before FM, and I have the povo pack sound system. I am currently using the factory antenna, which drops out fairly regularly. I will hopefully fit the aftermarket antenna this weekend.

The screen integration with this system is very good. The dash button is used to skip between preprogrammed stations. Steering wheel volume controls work perfectly but the station skip button doesn’t work for some reason.

Cameron has developed a semi plug and play kit which is quite easy to physically fit. With some further software development by Mobridge it should be a fully plug and play system. Overall an excellent upgrade.

Combo,

Where did you install the unit? I just bought one of these, and connected it by the Telephone module on top of the module-stack.
I cannot however seem to find it on the headunit, nor can I connect via til PC-app.
Must Sat-Radio be activated by code to enable it?

We had to enable the SAT Radio option in the CCF.

It's also necessary to connect the module to the MOST network while you are connected by usb to the laptop. With the MOST cable unplugged it wouldn't show on the Mobridge applications on the laptop.

I've just gotten the IID Tool BT in-house, and activated the SAT-Radio feature.
Since the radio stations are pretty much the same regardless of location here in Norway, the lacking scan function is not a dealbreaker, just annoying.
Aspecially if you are into commercial local radiostations, and travel a lot between cities.

The audio is crystal clear (as clear as a stations bitrate allows anyway), and reception is great. I'm using a $50 active window antenna, positioned in the upper, rear corner of the rear, left window.

You can see the "Scan" and "Reset" function in the Settings menu, but unable to initiate either. I assume this is due to the lack of certain physical buttons which the Sport and Discovery models have.

mObridge should've added BT-functionality to the unit, and thus allowing both streaming and Scan/Reset from a cellphone app.

Edit: I see you mention being able to change channels via the steering wheel buttons. I can't seem to do this. It only highlights the first of the six squares, and not much else. Using the >> << buttons on the headunit changes the channel. Any thoughts on what could be the cause of such an issue?