Sounds electrical - possibly a failed switch or a broken wire sometimes touching earth.
My l322 is in hi Range when I start the engine but then when I drive it switches to low range by itself..the switch by the gear lever has no effect but occasionally it will swap between hi & low as I drive...any ideas guys.. thanks
Sounds electrical - possibly a failed switch or a broken wire sometimes touching earth.
MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi
Sounds like the motor drive potentiometer is shot. Common problem. There was a guy on Full Fat RR that was going to have some made as the only part available over the counter is a whole new motor drive. In the meantime, unplug the motor drive underneath the car while it’s in high range - not sure if it will throw a fault or not, but may get you going.
If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.
What year model?
MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks