Just a quick question for the gurus out there in AULRO land does anyone think spraying a little silicone lubricant into the air receiver inlet hose, in the hope it will migrate through the system and clean/lubricate the valves in the system. Is a good or bad idea, normally on trucks with air compressors and air receivers they drain moisture from the receivers daily. I know the Range Rovers have a desiccant filter on the discharge to prevent moisture in the system and I have changed mine recently when I rebuilt the compressor but I was thinking the valves could become dry and stick if they did not have some form of light lubricant.
Just putting it out there.
Gippy
I wouldn't , they were designed as a dry system and adding a lubricant will just mix with the dessicant powder and make it leak worse or jam the valves.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks