Reply With QuoteTried cycling the battery power multiple times?
If that doesn’t work, there is a fault reset procedure you can do without a tool but can’t recall how that goes now - I used to be able to clear inactive fault codes and service warnings doing that.
Master
Hi All.
Battery went flat, and now all the warning signs are on.
Tried the steering wheel lock to lock, that usually clears everything, not this time though.
Any body out there have a suggestion, i dont have a faultmate.
Cheers Paul.
Super Moderator & CA manager
Tried cycling the battery power multiple times?
If that doesn’t work, there is a fault reset procedure you can do without a tool but can’t recall how that goes now - I used to be able to clear inactive fault codes and service warnings doing that.
If you need to contact me please email [email protected] - thanks - Gav.
AT RESTdisconnect both battery leads from the battery and remove then connect the lead ends to one another ( a jumper wire will do) and leave for 10 mins, this will reset everything. reconnect the leads to battery after.Originally Posted by Homestar
Fossicker
SupporterHi,
My diagnostic tool Autel 802( got off eBay)
Can solve this issue and read faults even air suspension.
Landie56
Jason
Range rover l322 2002 TD6
AT RESTYes, we all can with our tools but the OP doesn't have one
AT RESTI found out the other day my IIDtool BT which is licenced to my rangie, will read and clear faults and lower and raise the suspenson on another l322 that isn't registered to it , but it won't program, so if some one near you has one they may be able to reset yours.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks