Hi Guys
I've fitted an aftermarket reverse camera, it 'works' but looks like the camera is NTSC and the screen is expecting PAL (or other way).
I would like to get into the menu seen in the below link to try and set the screen to NTSC:
YouTube
They are in a 2005 car - I've seen several people using this same method but it doesn't work in my Aug'07 built car. I can access a menu from the Nav screen but that only gives diognostics of the Nav setup - Any ideas on how to see the camera inputs menu?
L322 3.6TDv8 Lux
The factory camera is NTSC, so you need an NTSC camera or one of those "universal" ones.
I'm not aware of any permanent fix to make the screen accept a PAL reverse camera input, those diagnostic menu functions are reset after an ignition cycle.
Freelander 2 HSE 3.2L - BUILD THREAD
Jaguar XKR 4.2L S/C - Jaguar XJR 4.2L S/C - MINI Cooper S
Old Jaguar Australia - www.facebook.com/oldjaguarau
Upgrades and retrofits for late model Land Rover and Jaguar vehicles. www.oldjaguar.com
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks